Yes, all R9080
NVSW519AE
sm455M450L5R9080
NV4WB35AME
sm455E800KR9080
Yes, all R9080
NVSW519AE
sm455M450L5R9080
NV4WB35AME
sm455E800KR9080
Simon Mao:i will have sw519a and BM35AM available after one or two months, I got some samples.
This is great news
Also, any news on the green reflecting AR coatings and/or ultra clear low iron glass?
I will gradually use green ar-coated lens on all products
Hi Simon, any details over M21e with culpm/sft40, try checking your official store for details about output current but those but cannot find any. Thank you.
Can’t wait for this to happen. Hopefully soon.
By the way Simon, it has been more than 3 months on the Quad TIR,(S21C/S12 Base). How’s the progress?
thefreeman: Simon Mao:i will have sw519a and BM35AM available after one or two months,
I got some samples.Great to hear, what CCTs are you planning to offer ?
All 9080 color rendition ?Yes, all R9080
NVSW519AE
sm455M450L5R9080NV4WB35AME
sm455E800KR9080
Recently install an SFT-70 6500K into S11 with convoy xhp70 6v4,8a 22mm single cell driver. The emitter does throw,it shows dot in the hot spot, but i think it has something to do with focusing or gasket set up.
Hey guys, looking to buy a M3-C with battery, any discount code for this black friday?
Hi Simon, any details over M21e with culpm/sft40, try checking your official store for details about output current but those but cannot find any. Thank you.
8A current
Can’t wait for this to happen. Hopefully soon.
By the way Simon, it has been more than 3 months on the Quad TIR,(S21C/S12 Base). How’s the progress?
Simon Mao: thefreeman: Simon Mao:i will have sw519a and BM35AM available after one or two months,
I got some samples.Great to hear, what CCTs are you planning to offer ?
All 9080 color rendition ?Yes, all R9080
NVSW519AE
sm455M450L5R9080NV4WB35AME
sm455E800KR9080
The host is being oxidized.
Simon - when are you going to release your version of the Pioneman K80? I saw a photo awhile back on your Facebook page
LTC:Can’t wait for this to happen. Hopefully soon.
By the way Simon, it has been more than 3 months on the Quad TIR,(S21C/S12 Base). How’s the progress?
Simon Mao: thefreeman: Simon Mao:i will have sw519a and BM35AM available after one or two months,
I got some samples.Great to hear, what CCTs are you planning to offer ?
All 9080 color rendition ?Yes, all R9080
NVSW519AE
sm455M450L5R9080NV4WB35AME
sm455E800KR9080The host is being oxidized.
Can you give us a sneak peek? Can’t wait for this flashlight!
What colours, drivers etc. are gonna be available?
Yes, all R9080
NVSW519AE
sm455M450L5R9080NV4WB35AME
sm455E800KR9080
I will gradually use green ar-coated lens on all products
Excellent news!
Hello please could @Simon Mao / someone help answering following questions regarding H2?
Convoy H2 LH351D
1) Can it be switched to 4 modes stepped permamently? If I do this, the next time i turn on, it is going to be in stepped mode? How do you change between steps? It states in product description:
7.flashlight off,6-click the button ——> normal ramping mode switch to 4modes 1–10–40–100)
2) Does the moonlight mode (hold button from off) works when the flashlight has been set to stepped mode?
3) Does it have charging indicator built in?
4) Can it take protected button-top 18650?
5) What is maximum power draw at 100%/turbo brightness?
6) Approximate runtimes?
Hello please could @Simon Mao / someone help answering following questions regarding H2?
Convoy H2 LH351D1) Can it be switched to 4 modes stepped permamently? If I do this, the next time i turn on, it is going to be in stepped mode? How do you change between steps? It states in product description:
2) Does the moonlight mode (hold button from off) works when the flashlight has been set to stepped mode?
1: Yes, it will stay in the stepped ramp unless you change it back to smooth. To change modes you just hold down the button from off, just like virtually every other e-switch light.
2: Yes, moonlight still works when using the stepped ramp
Pardon if already asked;
Can I get the L2 with the GT FC40 emitter? I really like the L2 length, but want the 26650 as opposed to the 21700 for longer runtime.
Thanks in advance
. [/quote] 8A current [/quote]
I see, Thank you Simon. i hope there's improvement in the ramping dynamics with the new driver.
Do all the FC40 leds on Simon’s store have good duv now? I seem to remember the first batch being a bit green?
How do they compare to the ones from rngwn?
Simon - when are you going to release your version of the Pioneman K80? I saw a photo awhile back on your Facebook page
25A driver is in production
Simon Mao: LTC:Can’t wait for this to happen. Hopefully soon.
By the way Simon, it has been more than 3 months on the Quad TIR,(S21C/S12 Base). How’s the progress?
Simon Mao: thefreeman: Simon Mao:i will have sw519a and BM35AM available after one or two months,
I got some samples.Great to hear, what CCTs are you planning to offer ?
All 9080 color rendition ?Yes, all R9080
NVSW519AE
sm455M450L5R9080NV4WB35AME
sm455E800KR9080The host is being oxidized.
Can you give us a sneak peek? Can’t wait for this flashlight!
What colours, drivers etc. are gonna be available?
use the 8A or 6A driver .
SST20/LH351D/219B/219C can be installed
Hello please could @Simon Mao / someone help answering following questions regarding H2?
Convoy H2 LH351D1) Can it be switched to 4 modes stepped permamently? If I do this, the next time i turn on, it is going to be in stepped mode? How do you change between steps? It states in product description:
7.flashlight off,6-click the button ——> normal ramping mode switch to 4modes 1–10–40–100)
2) Does the moonlight mode (hold button from off) works when the flashlight has been set to stepped mode?
3) Does it have charging indicator built in?
4) Can it take protected button-top 18650?
5) What is maximum power draw at 100%/turbo brightness?
6) Approximate runtimes?
1)yes, you can switch it to 4 modes.You can follow the instructions, it will not automatically return to stepless mode
2)yes
3)yes
4)no,top-head 18650 is too long
5)output current 3A max
6)around 1.5 hours
Pardon if already asked;
Can I get the L2 with the GT FC40 emitter? I really like the L2 length, but want the 26650 as opposed to the 21700 for longer runtime.
Thanks in advance
no suitable driver .
what about M26C FC40