Nice photo
fwiw, the Delta is Not Raw Aluminium, it is Nickel plated… (poor mans Titanium)…
I vote NO mixed metals… All copper, yes, All Titanium yes, bare aluminium Hey NO!
Missed the bare or raw part, too early. 
The first batch will planing update link on website in 6,June
Nice! Count me in Wurkkos!
count me in too!
Wurkkos - Im wondering what the footprint of the LED being used in this is? 3030? 3535? neither? :))
2323 
“slender waist” Wurkkos TS10 14500 Light first batch will release on 5th,June, PST 6PM (which is our working time 6th,June 9 AM-Beijing time)
First batch with single color aux led orange/red/ice blue for choice at price $19.99, if you are a member of wurkkos.com,
10% member code could be used at the same time-WKMB88
about 550-600 pieces this time,It looks a bit oily in the picture, it’s actually matte
Are you going to produce a proper deep carry clip for this at some point?
Not sure if they are changing the optic but I have seen several. It’s available as a option from a couple “custom” sellers too. (Not sure if I can mention websites here)
No problem to share links here.
Ok cool it was jlhawaii808 and skylumen.
thanks for the info, I looked and did not see a non Floody lens option for FWAA on JLHawaii… do you have a direct link?
I did see that skylumen offers a Tape Mod to the stock FWAA optic. I dont know how that works, and have not seen a photo of the beam before and after.
dont understand… the LED is not a standard size. Any modding will require a different mcpcb, such as the one the FWAA uses
I will be curious to learn if the TS10 uses the same floody optic as the FWAA, I hope not, as Im looking to get more throw than the fully diffused FWAA optic.
I look forward to seeing a beam profile photo of the TS10.
What LED is used? Why is this a secret? speak up Wurkkos
read post 189
Probably swappable with E21As as those CSP LEDs tend to use similar land patterns, still, how about dropping the actual part name ?
1919 is different than 2323 which is also different than 3535
they each have different size and arrangement of the solder pads
we cannot put a 219b nor 519a (they are 3535) into a Wurkkos TS10, unless we change the mcpcb
Its listed now people. Not yet in stock, but plenty of info: https://www.wurkkos.com/products/wurkkos-ts10-new-with-anduril-20-3-90-cri-csp-leds-and-3-single-color-aux-leds-14500-mini-edc-flashlight
“Emitter: 3 pieces 90 CRI CSP LEDs and 3 pieces single color aux LEDs” is about all on the emitters.
519a fit in all the standard optics of 3535 as long as they are dedomed, no? I thought it was just a height issue.
I’m in for a TS10. I hope they don’t glue the bezel (hint, hint), have high aux drain, and that it won’t only come in black!