So what’s the best guess on lumens?
3, 30, 300, 880? Or something like that?
Comparing it to other 4xAA flashlights, a listed time of 2 hrs 15 minutes for 880 lumens did seem a bit optimistic. For reference, some test results for other 4xAA flashlights:
Jetbeam PA40: 2.5 hrs at 468 lumens
Sunwayman D40A: 1.7 hours at 550 lumens.
Clearly, this light won’t be as good as those. To expect 880 lumens instead of their 500ish was rather “optimistic” on their part. So relatively, 40 minutes or so at 880 lumens isn’t so bad.
What I think will be more interesting/useful is the Medium mode. The listed medium on the factory-standard Starry Light is 400 lumens at 4 hours 40 minutes, or 150 lumens for 12 hours. More realistically:
Jetbeam PA40: 220 lumens for 6 hours
Sunwayman D40A: 220 lumens, 4 hours
Relatively, assuming Starry Light is overstating their ratings by a factor of three, you’re looking at a Mid of 400 lumens for 1.5 hours, or 150 lumens for 4 hours. Either way, I think that compares very favorably with the other two models.
That's in the ballpark. I'd like to say I'm in for one if the review is good, but I'm hoping the top post gets updated or pm's get sent out because I'm not going to even try following this thread that's already a hundred posts long even though the gb is still a long ways from kicking off.
Let me throw some calculations into this. Using the Cree calculator, 880 emitter lumens would be achieved with somewhere between 2.35A and 2.40A, and 0.2% of that is 4.7mA. That's the same as my XinTD X3 from IOS.
thats very circular, so in order to move things along and actually get lights sold i am declaring myself the only judge and will allow one light per (person, zombie or abominable snowman) at double the list price
If there are any vampire customers then their order comes with free garlic or garlic repellant (depending on my mood at the time)
They replied that it's not a problem. [Even though I would like to see the crazy haircut competition.. Or maybe that would give Jack an unfair advantage? ;)]