Just wanted to let people know I’ve so done a few of these for customers and am more than happy to do others.
I have 2 on the way (unfortunately only one from GB, I ordered another @ full price about 2 weeks ago from AE).
What’s with the half drilled hole under the button? Needs drilled out for an indicator.
Legolas_Jr
(Legolas Jr.)
September 23, 2014, 12:36pm
21
ChibiM:
The HD2010 is not an easy mod. It will take quite a bit of effort.
Not sure about this baby… but I hope it will be easier, as I am about to pull the trigger.
+1 The HD2010 is a beast to focus properly with a dedomed LED.
tatasal
(tatasal)
September 23, 2014, 12:42pm
22
Thanks guys for sharing your comments/experiences with this light.
@ cereal_killer: If you have a link, you may post it here.
Again, that’s true BLF spirit right there.
Werner
(Werner)
September 23, 2014, 1:01pm
23
Thanks a lot, I waited forever for a good price on this. :bigsmile:
mm166
(mm166)
September 23, 2014, 2:02pm
24
I like this one but I don’t really like electronic switches.
phantom23
(phantom23)
September 23, 2014, 2:22pm
25
XP-L wouldn’t change anything because it has the same beam profile as XM-L2.
DB_Custom
(Dale)
September 23, 2014, 2:43pm
26
I liked my first one so much, I immediately bought a second! The size and overall shape just fits the hand nicely, and with 3 18650’s the run time is superior with less sag when hot rodding. And, uh, well, they’re both hot rodded.
The e-switch is great with a reversing UI in a FET driver. This lets you go directly to Turbo or moon, as you wish. Love that!
I’ve got one with an XM-L2 de-domed and working far better than my 2 HD2010’s (369.25Kcd with an UCLp lens), the other has an MT-G2 utilizing 6 Efest Purple 18350’s. I limited that one to 3000 lumens in the firmware as it was wanting to make over 4000 at 100% and making more heat than I wanted in this light. I wasn’t feeling up to making a copper heat sink for it, so I used an ounce of silver instead. Works all right, would have preferred the copper with more mass.
I highly recommend this light. These immediately became personal favorites. :bigsmile:
garrybunk
(garrybunk)
September 23, 2014, 2:48pm
27
Argh!!! Trying to resist . . . must resist . . . c'mon self, you can do it! :)
-Garry
DB_Custom
(Dale)
September 23, 2014, 2:51pm
28
This is a better HD2010 with 7500mAh cell capacity (or more!) Resistance is Futile!
DavidEF
(DavidEF)
September 23, 2014, 2:53pm
29
Think of the CHILDREN!!! Ah, go ahead and buy one. I gave in, you should too! J)
Kafar
(Kafar)
September 23, 2014, 4:53pm
30
WHY, WHY, I’m asking WHY You all are doing this to me??!!
I didn’t wanted to order more lights before EEX6 GB, but You did it to me, and had to order one of this J)
Hope it’s gona be another great light for mod :bigsmile:
jmpaul320
(jmpaul320)
September 23, 2014, 5:38pm
31
FYI - I contacted vestureofblood about a copper pill - he has ordered a sample and will be looking into it
DB_Custom
(Dale)
September 23, 2014, 5:43pm
32
Bucket is already making one as well, he’s had a Courui for a while now, since before he got onto the Damascus build for Matt.
DavidEF
(DavidEF)
September 23, 2014, 5:47pm
33
Count me in! I’ll be very interested in a nice, thick copper pill for this!
DavidEF
(DavidEF)
September 23, 2014, 5:48pm
34
Yeah, same thing I said above. I want one!
DB_Custom
(Dale)
September 23, 2014, 6:13pm
35
Bucket posted this thread 2 months ago…
Courui copper pill
Hopback
(Hopback)
September 23, 2014, 9:16pm
36
I knew that I should have waited before clicking ‘buy’ for one of these lights from another vendor…….could have saved almost $10 !
Ho-hum
Flomotion
(Flomotion)
September 23, 2014, 9:48pm
37
Yep, I bought one a day/or two ago, for $32.07, oh well, I didn’t pay 38.
Flomotion
(Flomotion)
September 23, 2014, 9:53pm
38
Resistance is Futile! J) J)
tatasal
(tatasal)
September 23, 2014, 10:04pm
39
Thanks for the copper pill link, DBCstm. Link now added in the op.