Nice, this is a must-have build in every modder’s collection, I don’t use mine at all because of the weight but it was lots of fun to build. The beam produced by this optic is far superior to any small triple/quad carclo.
I like your idea of upgrading the switch PCB, might start doing so with my future mods! What is the oshpark link for ordering? Thanks
My favourite built light for now…
I want to sell my Palight Boss1 but if I don’t I will build a triple C8 reflector monster of It with three XP-L HI or dedomed XM-L2 and between the three C8 reflector will be an S2+ reflector or a carlco 10507 with triple XP-L for flood. Independent switches for throw and flood.
Yes Ledil Cute lens. I thougt about polishing but I try to use it this way and if I like it I will leave it that way. I built it one day ago so not used it much.
And the lighted tailcap is working
I used BLF A17DD driver, and 470 Ohm bleeder resistor on driver and 47KOhm resistors for each pair of the 6 leds in the tailcap. In the tailcap I used PD68s rev5.1 led ring board instead of the stock aluminum washer. This is for the 14mm rubber boot.
The six leds eat 0,106mA so if I use a 3000mA battery it will last for about 19 days.