Changing driver on Akoray K106/TrustFire F20/UniqueFIre AA S1

3 posts / 0 new
Last post
fran82
Offline
Last seen: 1 month 1 week ago
Joined: 07/31/2010 - 10:15
Posts: 2603
Changing driver on Akoray K106/TrustFire F20/UniqueFIre AA S1

My TrustFire F20 died after using a 14500

Now, waiting DX response, I am trying to know how to fit a 16-17mm driver in a place that can accept only 15mm driver.

I know that can be removed the brass ring (I have done it) and now it seems that can accept the 16-17mm one, but the negative conection will be poor...............................

 

As shown here... any other idea? http://sites.google.com/site/miguelmoreto/home-eng/projects

 

Also about the driver board http://www.dealextreme.com/details.dx/sku.15880

Can accept from 0,8 to 4,5???? Sure?????

Good brightness with AA?

 

Anybody knows?

 

Thanks!

Enjoy BLF

Edited by: fran82 on 09/15/2010 - 15:52
Nautic
Nautic's picture
Offline
Last seen: 3 years 3 months ago
Joined: 02/14/2010 - 14:01
Posts: 992
Location: Europe

This driver seems to have the right values: http://www.dealextreme.com/details.dx/sku.4735

It also has a broad copper negativ band, so it could certainly be sanded down to fit, without

missing connectivity.

Cheap quality is good - Expensive crap isn´t

fran82
Offline
Last seen: 1 month 1 week ago
Joined: 07/31/2010 - 10:15
Posts: 2603

A little expensive and some says 17mm diameter.

Stil waiting DX response

Enjoy BLF