18350 Battery tubes for BLF A6, Eagle Eye A6 and X6, as well as codes for short Convoy S2+ tubes in Blue and Red!

[Halo]

GB lists usually serve just to PM the GB members.
Capitalization does not matter for PM, only correct spelling. Try PMing yourself.

[DavidEF]

@ReManG

@Muto

I’d do 3 if at $5 or less.
Only problem that may likely happen is the color may not match perfect to the other complete BLF A6 Flashlights.
Different batches, different lots.
Some members get hissy over colormatch issues, so it probably should be listed as “you get what you get, no crying paypal dispute after the fact”

Later,
Keith

Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto

Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!

[B42]

Moi aussi s’il vous plait!

[slow2go]

I would like Two of them

[OscarM]

I’d be interested in 2

[ahirshy]

Great idea - exchangeable battery tube sizes; Something I always thought was logical for many commercial lights which seem to share the same ‘head’.

I previously detailed it here: NEW EagleTac D25C & D25A Ti - *2015 Edition* with regards to EagleTac and Nitecore, who could have done the same with most of their offerings within a model range.

Please put me down for two. Would it also be feasible to include a small plastic spacer tube to pad the more common 16340/RCR123A so they can also be used without rattle in the 18350 tube. (Similar to that which came with the NC EC11).

I’d pay the extra dollar (if even that much) which it would cost to produce and include such a spacer.
Hirsh

[ReManG]

@DavidEF

@ReManG

@Muto

I’d do 3 if at $5 or less.
Only problem that may likely happen is the color may not match perfect to the other complete BLF A6 Flashlights.
Different batches, different lots.
Some members get hissy over colormatch issues, so it probably should be listed as “you get what you get, no crying paypal dispute after the fact”

Later,
Keith

Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto

Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!

LOL, I will make sure they are the correct color for each emitter sir… and the free brown grease packed inside each tube is for ALL of your flashlights… It will make the threads slicker than, well… you know…. :bigsmile: J)

[ReManG]

@ahirshy

Great idea - exchangeable battery tube sizes; Something I always thought was logical for many commercial lights which seem to share the same ‘head’.

I previously detailed it here: NEW EagleTac D25C & D25A Ti - *2015 Edition* with regards to EagleTac and Nitecore, who could have done the same with most of their offerings within a model range.

Please put me down for two. Would it also be feasible to include a small plastic spacer tube to pad the more common 16340/RCR123A so they can also be used without rattle in the 18350 tube. (Similar to that which came with the NC EC11).

I’d pay the extra dollar (if even that much) which it would cost to produce and include such a spacer.
Hirsh

Wont hurt to ask, and that seems like a great idea about the spacer. I have used skinny O-rings, but they come off and like to fly away…

Thanks

[chuckhov]

Manker might get pissed with us if not for all the business this and out Sister GB is going to bring them.

Work with BLF and the Future is Yours!

Time marches on, and with it’s passing comes Progress!

We are Not Joe Six Pack, that thinks that he needs a flashlight and so buys “one”.

NO! - We have sense enough to know that We NEED Many, MANY lights, most of which have not yet been conceived.

Manker: Provide us with what we want/need, and we’ll Be Back!

Of this I am certain!

Thanks,
-Chuck

[Muto]

@DavidEF

@ReManG

@Muto

I’d do 3 if at $5 or less.
Only problem that may likely happen is the color may not match perfect to the other complete BLF A6 Flashlights.
Different batches, different lots.
Some members get hissy over colormatch issues, so it probably should be listed as “you get what you get, no crying paypal dispute after the fact”

Later,
Keith

Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto

Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!

DavidEF,

You are messed up!
I mean that in the best way.
Maybe the tube tint should be 18350-CB (Cool Black), 18350 C-NB and maybe 18350-WSGB (Warm Semi-Gloss Black)
Or we could have Sparkle Black with glow in the dark flakes in the paint for the kids.

Ohhh, and one more small thing, I’d like mine to be serialized, I need 69, 13, and 666!
Later,
Keith

[B42]

One of mine is a gift for a girl who would love Cool Sparkle Black Rainbow Glitter plz.

[Gunga]

I’m in for 3. Can they be non-anodized?

[ReManG]

@Gunga

I’m in for 3. Can they be non-anodized?

Right now, just the anodized version. I had forgotten about the non-anodized light bodies… I will put in a request if this gets close to manufacturing, it is still just a concept right now….

EDIT: Forgot to put myself down

5ea please!

[Gunga]

It will affect my decision since I’m going bare lights.

[ReManG]

@Gunga

It will affect my decision since I’m going bare lights.

I will leave you down for three until we find out…

[sesgum]

Would like one. Thanks for your efforts!

[Halo]

@B42

One of mine is a gift for a girl who would love Cool Sparkle Black Rainbow Glitter plz.

You guys have Cool Sparkle Black Rainbow?!
I might have to get one. For my, ermm, niece. Yea. :bigsmile:

[Gunga]

Cool. I’ll take at least 1 even if anodized

[richnpc]

I’d be interested in 2

[netprince]

Interested in two. Nice