I’ve never modded a torch before and have a Manker E 11 I’d like to de-dome but way before I get to that part having never done it before and struggling with how to correctly take one apart.
I’ve removed the bezel and reflector and a small white “washer” that was around the LED, I’ve pushed the wires from the board at the front through which I thought may allow that part to come out but it won’t quite and the rear part that I’m guessing is the driver will also move but not far enough to come free from the head.
I’ve tried googling torch mods but there’s so little information out there I’m not really any wiser for having done that.
If anyone could help spoon feed me (my understanding of the terminology isn’t great either) what I should do next it really would be greatly appreciated!!