-
I installed the TS25 hex with the 8C aux toggle. It works!
I especially like that it toggles the High aux brightness (or whichever brightness was used last).
This is very good, because the Low Aux on TS25 are too dim to be useful for me.
Thank you! -
Installed the TS10 hex w 8C aux toggle. It works! But there are other issues:
the light turned on w Aux in blink mode… not a problem, I used 7C, twice, to get to low mode, and now that toggles on and off w 8C just fine.
however the light now turns on the main LEDs at 0.08 lumens floor… always… If I ramp up to a higher output, and then turn off and back on, the light reverts to the 0.08 lumens floor.
also when I do battery check, the light blinks 5x, which is not correct
also when I try to go to simple mode, there is no flash to confirm, and the inaccurate batt check still repeats…
I reverted to my backup, atm the TS10 hex w 8C toggle is not fully functional for me.
Thanks for your efforts regardless.