Is it possible if the driver can be configured to high power setting (i.e. 100mA instead of 25mA)?
Since I now have a stronger emitter to benefit from higher drive current.
I know that during development, the driver was “set” at 25mA, and I assume that is a resistor value somewhere. So I would not be surprised if, within limits, you can tune the driver.
I’m in for one!
I’m interested in four C01 hosts if they’re $6.50 each and black only.
If there was a non-anodised option or another colour available I would get a couple more.
50 black hosts, please.
For real? lol.
Not sure. Maybe if Sofirn makes a real good offer 
.
But seriously, it’s one of the best 5mm/AAA hosts ever. If we’ll get a chance for another run, I’m in for more samples that I’ve signed for, that’s for sure.
I have numerous Rgwn's HI CRI emitters but no host in sight yet... :(
OT
Have you tried the new high power 3200K? They’re amazing. Not for this host, but they really shine in something like the tube.
/OT
Not yet, in a week or two when i get home!
Product improvement suggestion: redesign the clip—it is too stiff, doesn’t open wide enough, and is too easy and prone to break right at the tube clamp.
As it is now, the loop portion begins immediately at the tube clamp, this is a high stress bend location and could/should be extended about 3mm back from the clamp; then increase the diameter of the loop from 2.5mm to 6mm, then extend the length of the clip blade about 5-6mm. These changes would reduce the pressure and make it easier to open the clip for use on a pocket or hat brim. They would also reduce the material stress and the tendency for the clip to break.
Throw me in for three of these, thanks.
Interested in three.
Thanks
I am currently down for 2 but can you add an addtional 4 for a total of 6?
I would need some extra, 10 total.
Thx
Nice find!
are those yujis the same as the ones Sofirn put into the C01
I presume that’s the type they used.
Edit: Please have a look - FWIW: Yuji and rngwn 5mm LEDs, observations and comments
^ As far as I’ve seen, that Australian shop has been the only place the 3200K Yuji’s have been available since shortly after the original C01 batch, but I think their shipping outside of Australia is pretty expensive.
Interestingly, Yuji does still list the 5600K available on their website, in packs of 1000.
It isn’t expensive. I mailed Mr. Turner because his shop didn’t work for my country at that time and he offered me unregistered shipping for little money.
Great catch but personally i wouldn't even bother when Rgwn's stuff is just perfect.