Diving light, material selection

Flashlight Modding and DIY Parts
1

hi

with a friend, we would like to create a diving light, a canister.

something like

we plan to use many: Keeppower 26650 5200mAh battery (lenght: 71.1mm - diameter: 26.4mm)

surely in different setup

3x22650 ( 1x1x1)
6x22650 ( 2x2x2)
9x22650 ( 3x3x3)

we would like to be able to interconnect theses different setup, but i think that would be difficult and not a priority for the begining.

for the wreck head, diameter should be arount 66mm

i want to support many brightness levels: high, medium and low

for the del, we have checked the XHP70, XHP50, XM-L2 T6, CREE MK-R, SBT-70, SBT-90… and XHP70, XHP50 seem the best in term of power, price, size… if you have any suggestion…

i check the thread about XHP70

to get more information

could be nice to be able to have 1 to 6 del

i saw some reflector for XHP70

do you know any driver, MCPCB, reflector that could fill theses need?

thanks

2

You should be able to use a driver for a MT-G2 (6 volts). The only mcpcbs that I have seen for the XHP were made by adding copper pads to a XM-L mepco.

You could build a triple-triple xpl. You can get drivers, mcpcbs, optics and LED’s from Mtn electronics. I would bet that they will be carrying XHP soon also.

Mtn Electronics

3

they seem to have one mcpcbs for the XHP


http://www.mtnelectronics.com/index.php?route=product/product&product_id=437&search=xhp

will need to wait surely some week before there have more product for the xhp let