I did this runtime graph over a year ago, which shows a nice flat runtime. Olight says the runtime for the Desert Tan I3E is 1hr, 10min with NiMH. This graph confirms that. Note that this graph was for the silver 120 lumens version. The desert tan is the 90 lumens version, which would have a slightly longer runtime.
Use an Energizer Ultimate Lithium, and you will get about 1.5 times the runtime.1.5 the runtime.
Nice. Thanks Terry! I was already planning to use Energizer Ultimate Lithium in mine. Your testing confirms that it will be a good choice.
The charts don’t really tell the whole story, though. The Energizer Ultimate Lithium cells are very expensive, and one time use. Eneloop Pro are NiMH rechargeable. So, the runtime for the Eneloop Pro would be that same length of time, over and over again, for as many times as it will take a full charge. That means, it really beats the Energizer Ultimate Lithium on complete runtime by a few hundred hours!
I know you know this, and most of us BLF members know this. But some people don’t, or they might just miss it when looking at your data. So I thought it needed to be clarified.
Understood. I use Energizer Lithiums in my car lights, where the light might be used sporadically over several years. I know they are unlikely to leak, shelf life in excess of 10 years, and aren't as bothered by extreme heat/cold.
Got mine today , it’s tiny , smaller than the jet beam jetu.
The tint is nice & white.
The included battery is shite.
Now I’m getting spammed a few times a day by olight , time to hit the unsubscribe button me thinks.
I like it , it’s super bright for its size , it’s blinding to look at (I don’t recommend it) ,the twist action is super smooth & easily operates with one hand ,the specs say 45 minutes runtime on alcaleek but what’s impressive to me is you get 70 minutes with an eneloop pro.