Any heat transferred to the inner tube will come from the body which is aluminium + anodising = no benefit
I canāt say the redesign doesnāt look good because it does, but it makes it look like a Lumintop light instead of a Fritz Custom. So I will most likely not participate as I am not in the market for a factory light.
Thank you, Toykeeper, for all your work on this oneās UI. Much appreciated.
I also liked the old ābasicā design better, but I seem to be one of few. Very nice project overall. Hope it will see itās first production fase soon.
I also prefer the original design.
I was intrigued with Fritzās original minimalist industrial design (committed @ #169) and I continue to be committed with the more commercial re-design. As I see it even with the adapted suggestions, itās still a Fritzās design, just the next version :+1:
Sounds like there are strong opinions on the benefit of (or rather lack of benefit for) a copper inner tube. Lots of reasoning for why it wonāt work. The body design is so nice that a tweak of the unseen inner tube is probably the first and only hack Iāll be capable of or willing to try :innocent:
Awaiting patiently and adding my thanks to the efforts of Fritz/Miller/TK and all the FW3A team
Add me for one please! - FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #3024 by wishiwereaskibum
You are number No. #667 and #677 on: Interest list , Post # 4 , Page 1 ā:FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #4 by FW3A_Team
+1, I put it in the number #1171 on: Interest list updated by pepinfaxera, View page 71, ,
FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #2127 by pepinfaxera ,
How many lanterns do you want in total? . . . ā¦xā¦ units? .
I donāt know what my original number is but I would really like to be put down for another light, for a total of 2 lights. FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #3039 by toddcshoe
You are number No. #1047 on: Interest list Post # 4 , Page 1
+1, I put it in the number #1174 on: Interest list updated by pepinfaxera, View page 71, ,
FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #2127 by pepinfaxera ,
Out of all the aluminum parts, the one which would most make sense in copper is the pill section, the knurled section at the head. Thatās where the most heat is.
Iām not sure why anyone would want a copper inner tube, since it isnāt visible and carries no significant amount of heat or electricity. Copper there would mostly just make the light heavier and more prone to unintended shorts.
Electrically, a single thin wire would work fine in its place. It should be electrically shielded somehow though, to prevent shorting between ground and the switch signal. On mine, the anodizing there was too thin and it seems to have made the driver clock speed unstable, but when I put a piece of paper between the tubes, the clock speed went back to normal. So, if anything, the inner tube might get a thicker anodized layer than the rest of the host, to prevent that type of issue.
Please add 1 more for me (total of 4)
Thanks
I asked for a forth in post #2970 and I donāt think it was added. If I am mistaken please excuse me.
Thanks,
shirnask
You are number No. #373, 515 and #716 on: Interest list , Post # 4 , Page 1 ā:FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #4 by FW3A_Team
+1, I put it in the number #1150 on: Interest list updated by pepinfaxera, View page 71, ,
FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #2127 by pepinfaxera ,
Despite liking the old design better, I think I would really regret skipping this one.
Please put me down for one please.
Pardon my ignorance, but can someone please explain what is meant by muggle mode?
an easy mode for non flashlight geeksā¦just easy on/offā¦or maybe just a few brightness settingsā¦no strobes, maybe no really hot turboāsā¦etc
āmugglesā were what the magicians of Harry Potter called non magical people.
ā¦ On mine, the anodizing there was too thin and it seems to have made the driver clock speed unstable, but when I put a piece of paper between the tubes, the clock speed went back to normal. So, if anything, the inner tube might get a thicker anodized layer than the rest of the host, to prevent that type of issue.
Maybe the final design should be modified to be done more like how Liteflux did it.
My Liteflux LF2XT also has an electronic tailcap switch and inner tube, combined with outer body. In order to electrically insulate the inner tube and keep it isolated from the outer tube, Liteflux inserted a thin plastic middle tube.
I wonder if the Samsung LH351D is being considered. In Texas_Ace results the efficiency was quite high and the high Vf is not a problem for a triple.
Ok, put me down for one please. Post # 540 Geuzzz
Sorry, but please take me of the list. I just succumbed to the temptation of the 3800 nichia lumens in the D4 :person_facepalming: Post # 890 Geuzzz
Despite liking the old design better, I think I would really regret skipping this one.
Please put me down for one please. Post # ā¦. Geuzzz
ā¦ I put it in the number #1175 on: Interest list updated by pepinfaxera, View page 71, ,
FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #2127 by pepinfaxera ,
Greetings.
I donāt recall where I was on the list, I do remember The Miller added meā¦Iām not too worried about that.
Can I get put down for a second one?
Thanks
Iāll take oneā¦thanks The Miller ā Sea Post 632 xray291ā:FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #632 by xray291
Iāll sign up for a second one as wellā¦ Sea Post 1705 xray291
You are number No. #342 and #794 on: Interest list , Post # 4 , Page 1 ā:FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #4 by FW3A_Team
How many lanterns do you want in total? . . . ā¦xā¦ units? .
Thanks for checking things for me.
Iām locked and loaded for 2 lights. Thatās perfect!
Thanks all involved for making this a reality. Although Iām not a modder, I love having lights that others around me are in awe of.
Put me down for one please.
I would like 2!
Thanks! :+1:
1 please