FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

Interested in 1 please

i’m in for 1 light
btw, i’ve heard that you can customize the driver, with your phone, is it true?


You can change menu settings using the rear button or reflash the driver by removing it and putting a reprogramming clip on it. Usual stuff.

Well, in theory, after making firmware with that feature, yes. The driver has an “optic nerve” to allow it to sense light. But it’s not actually used in the stock firmware.

Also on the TLF list but to be on the safe side please put me on the list with one XPL HI 3D and one LH351D.

interested in one LH351D

Put me down for one!

looks interesting, what about 21700 batteries, any idea to support those?

For the FW3A?? :question: . I am gonna go out on a limb & say no.

Well Put. I couldn’t come up with anything that kind.

Yeah no. The FW3A will be staying as an 18650 light. I want it to stay small :slight_smile:

…well, you could take out the inner tube and replace it with a thin strip of Nickel or copper…??

:smiley: … Thank you, I know what you mean. :+1:
I had to work at it to keep it “kind”. :wink:

Interest list updated again in post #4.

- TK

Interested in one LH351D 4000K 90CRI :face_with_monocle:

In the TLF I have registered (Leo) for 4 pieces LH351D. To be on the safe side I would like to do it here, too.

ok sign me up for 1 x LH351D 4000K 90CRI .

I think I have two on the list, please add me for 2 more. Thanks

In TLF I have registered one FW3A (219.Meyer on the TLF-list) and opted for a second one. To be on the safe side please put me on the BLF-list with one XPL-HI 3D and one LH351D.

Got a message back from Digikey again. And good news!

Great for the FW3A groupbuy, but not too great for smaller buyers.

For individual samples(less than a reel), the tint bins are randomly available from T6, TA, T7 and TB. No wonder the LH351D from Bob Mc Bob looked so green.

For a 1x reel LH351D (like our groupbuy), the only tint bin confirmed and available is T6, so way better than the 2nd and 3rd batch of LH351Ds, so about as good as the 1st batch from AEDe, but still not the godly T2/T4 bin.

HOWEVER, for 4x reels of LH351Ds, the tint bins are confirmed and available in the T4 and T6 bin, and the T4 bin is way below the BBL and closer to 3900-4000k rather than 4100k-4000k according to the Digi-Key rep. That is very good.