FW3A Moonlight default mode

[Geuzzz]

@fogus

I’m pretty technically adept. What does it take to update the form firmware? Do I need special hardware to connect?

> Or in the most recent builds (which probably aren’t shipping yet), there’s a way to manually set the memorized level, so a single click from off will always go to that level.

That sounds exactly like what I want.

Yes you would have to buy hardware. This thread is pretty informative.

Need step-by-step guide for idiots on how to flash Emisar D4 with Anduril

I tried this guide from the Emisar D4S review thread today: Ok. Starting with the basics, assuming everything has to be bought. 1. Buying the hardware First you need the programmer itself, an USB ASP Programmer. The original can be found here USBasp - USB programmer for Atmel AVR controllers - fischl.de while you can find it cheaper on Aliexpress or on Amazon For the D4 or other boards without the nice connectors, you will need an SOIC8 programming clip to connect to the chip Also, to get…

Or you could buy a D4 V2. They have the newer software installed.