Get the Convoy C8 AK47 from Banggood (8*7135)

[WarHawk-AVG]

@harry218

@Sirius9

Yes, that is just fine.

Thanks!

@bushwhacked

After adding a few chips to mine, I was having trouble with the current measured, 2.8 up to 3.5a. It would not read past 3a. I took the pill out and unscrewed the driver to test. 3.48a. Screwed the driver in 3.48~a. Put the pill back in the head 3~a.

I had to clean my threads for it to work properly, the pill threads. I also removed some of the anodizing from the lip,where the head screws on on the inside of the tube. I have no problems with current now.

3.5A must be extra awesome for small amounts of money! How do you added the chips? Isn’t that will make the driver thicker?

You can stack the 7135’s by soldering them on top of each other

How-To: Add 7135 chips to a Driver Board (Stacking)

This is my first entry in my How-To series. These are step-by-step instructions for tasks related to flashlight modding. There are many different ways to do things, so I will show the methods I use that work for me. This How-To will show how I add AMC7135 current regulator chips to a flashlight driver board. Our desire to do this is to increase the output current to the emitter. J) This isn't really a soldering how-to, so I assume that the reader already has basic soldering knowledge and sk…