Mike_C
(Mike C)
December 11, 2017, 9:50am
1
Does anyone know what kind of lighted switch is used in lights that display battery status with different colors on the E-switch? Two lights I know of that have these kind of switches are the SupFure LS-5 and Convoy S9.
I’ve gone through my usual component supplier and searched on AliExpress but not found anything that looks that these. Does anyone know where to get them?
Mike_C
(Mike C)
December 14, 2017, 11:22am
2
Bump. I’d really like to get my hands on a few.
Lexel
(Lexel)
December 15, 2017, 4:11am
3
I made boards that fit the Astrolux MF01/02 11mm with a bit sanding and 12mm for Q8, L6
2x2 LED with balance resistors
Lighted tail switch board replacing the washer around the switch
All my boards here some untested are not public yet
I want to make on topic with my boards I have shared on Oshpark
The updated TA drivers are still pending as I want to test them before they get public
All build drivers can be bought in my sale topic or PM me
.
Q8 (12mm) side switch boards
order those in 2oz for right thickness
2 LED with balance resistors
[image] [image]
2x2 LED with balance resistors
[image] [image]
MF01/MF02 (11mm) side switch boards
order those in 2oz for right thickness
2x2 LED with balance resistors
[image] [i…
Mike_C
(Mike C)
December 15, 2017, 9:49am
4
Huh… how did I miss those? Do you have part numbers for the LEDs you have used on them?
Lexel
(Lexel)
December 15, 2017, 7:48pm
5
I ordered from this Aliexpress shop in 0603
they got all colors including warm white and pink for example
https://www.aliexpress.com/store/1758868
Mike_C
(Mike C)
December 16, 2017, 9:17am
6
Thanks! Gotta get me some.
Mike_C
(Mike C)
December 17, 2017, 12:35pm
7
Lexel, may I ask what switch fits on your boards? Got a link for them too?
Lexel
(Lexel)
December 17, 2017, 2:10pm
8