as of right now i only have one triple built and that i switched to a A17DD-SO8 driver and works awesome, cant build a quad because i dont have a heatsink yet the machinist has mine
sorry copy and paste the wrong size im using the 17mm board
Will a single 7135 at 380mA run 3 XP-L’s? I hadn’t thought about it, but it might be too low. If they work, moon will be barely discernible in a cave! 
I’m using Wights FET boards as well, any of the BLF FET boards will work as long as they’re for a clicky switch and not an e-switch. Richard can fix you up with the driver, or Nitro can…Nitro?
i ordered a wrong board and got a refund and a week pasted and darn osh park sent me 30ish boards,so yea pm me what u would like my order from mouser should be here soon
I hadn’t thought about it either, but I guess we’ll find out! If it isn’t usable, maybe I’ll try stacking a second 7135, or just disable the dual-pwm altogether.
Yeah, you could always stack one or two as needed…that should work. On the PZL driver the single 7135 is on the battery side, so it’s easily accessible without disassembly. 
Nitro, would you like me to pay the $12 for shipping or the exact shipping cost? I haven’t checked exactly what the cost is to ship to NSW, Aus, 2640 since the USPS site is a bit confusing. Thanks
Will ill send u a pm on your order
I’d expect a 350mA 7135 to be able to do it. The question is at what PWM level? It’s reasonably likely that the firmware will have to be fiddled a bit more than just tweaking values.
posted and additional payment sent per our PM
Ok Nitro, now even I am getting antsy! So you’re going to the machine shop tomorrow? And you expect to have the finished sinks in hand by Saturday? Do I understand this right? And you’re flying down to Texas Saturday evening to deliver mine personally? 
lol Whaaaaat? I really really REALLY wanna see that quad in copper! 
Payment sent for 1 each copper triple and copper quad heatsink. Thanks.
Got it Gj 2nd post updated, Dale he just got the material today :) im not sure on Saturday i told him to take his time so they are done right lol a trip to Texas would be great right now since im tired of all this white crap flying
We no gottee white crap. Supposed to be in the 60’s next week.
Man ill trade my x6 for that weather well maybe :) it was 3 degrees this morning
I’ll make that trade. You give me the x6 now, I’ll give you the weather in about 6 months
Payment incoming for 2-copper triple kits and 1-copper quad kit.
Thank you for putting this together for us!
Jon
so is the driver for the copper triple a 17mm or 20mm? the pic says 18, you made a note it was 20, then posted later you used a 17mm driver.
Payment sent for a copper triple
$12.50 heatsink
$5.25 s/h
————-
$17.75 total
the x6 takes a 17mm driver, i think your talking about the different sizes are for the base of the heatsink