Any idea where I could get it except Lumintop factory? I want to try a few different diodes in my Tool.
Thanks, Mike
What are the dimensions? Is it smaller than 10mm sinkpad? I bet it’s going to be tough if not impossible to find just the empty stock lumintop pcb for sale, but maybe one with the same diameter without the small protrusions on the side. Find a spare complete light on sale on amazon or wherever and use the two to swap and experiment? My guess is the sst-20 would be nice in that light depending on your preference. Good luck
Why not reflow to the original pad?
I used a 10mm one from kaidomain. It fits but it’s thicker than the stock one so the head doesn’t screw all the way down. It works but it bothered me so I reused the stock one.
IIRC, before I started to reflow myself, I bought a 10mm KD board with LED and used it in the C01S. Had to file down the noses somewhat but it worked well. When my Drop Tool AAA arrived, I used the C01S board in it.
So I guess one source is Sofirn. They usually sell components on request.
1 single-sided left here but no idea how much shipping will be:
https://www.mtnelectronics.com/index.php?route=product/product&path=67&product_id=775
Thx guys, I try Sofirn first.