Pill needed for Ultrafire C2

Some weeks ago, I ordered a Ultrafire C2 body from DX (this one: http://www.dealextreme.com/p/ultrafire-c2-diy-cree-led-flashlight-shell-casing-complete-set-with-driver-pill-1-18650-2-cr123a-15946) to put something nice and bright into it. Now, before ordering I read in the comments that often a brass ring is missing which is needed to hold the driver in the pill. To my surprise though, not only the brass ring was missing but the entire pill! I contacted DX, and they seem to be sending me a whole new light sometime (which is great), but now I have an empty, unusable body collecting dust on the shelf. I noticed the pill from my KD C8 fits in there perfectly, and I have found the replacement pills on MF ( http://www.manafont.com/product_info.php/5w-120lumen-3mode-led-emitter-module-for-ultrafire-c8-p-6111 and http://www.manafont.com/product_info.php/5w-120lumen-5mode-led-emitter-module-for-ultrafire-c8-p-6112 ), but they already have emitter and driver installed, which I have no use for. Has one of you seen a pill like this, but, you know, 'naked'? Would be a great help

edit: links didn't work

That blows, I got a DX C2 and it had the pill and the brass ring when I got it. I thought the C8 pill might fit, but I did not try it, that is good information thanks. I am interested in picking up and extra pill if and when you do find one. You might have to get the pill from Manafont and gut it out. I had issues fitting a protected battery in mine with the NANJG 105c driver.

Otherwise this is a great light it handles the heat of an XM-L at 2.8 amps with no problem plus it throws a really nice beam with that big reflector.