Please Recommend 18650 Lights & Accessories for Guns

[willie]

Built a few of the 3 cell tr1200 host direct drive with coin cell powered fet switch. No resistance issues with tape switch.

TR1200 PT54 RED Aspheric Build

This flashlight was built for weapon mount, long range use. It features solid copper heat sink, Ebay seller DTR-LPF PT54 red led, Optolife 50mm Aspheric lens, Direct Drive 4/3AF (18650 size) NiMH batteries, 18GA Teflon wire and a MF $13 TR-1200 HOST W/Ebay extension. Wire tape switch (too much resistance) will have to be reworked probably MOSFET switched. Using standard switch or copper penny . Running 3 cells was able to pull 12A. A bit high but this a short run time light. All copper parts …

Beam shot is a little tighter with the Optolife lens that my original 9A Maglite.

Aspheric PT54 Red BEAM SHOT

Enclosed are a couple of pics. One is my feeder lights and the other is feeder light with ASPT54 Beam shot. My FL are made of 2 3up XRE red stars and are solar powered and run max setting total 6leds @ 700ma rated total 240 lumen. My Aspheric PT54 red 700 lumen maglite is listed on this forum else where. These shots were @ 110 yds. Estimate beam width 30ft. [image] [image]