ReyLight copper pineapple mini, AAA/10440 flashlight, Nichia 219B 4500K R9080 high CRI LED

Link here.

Made of solid copper bar.
Using single AAA battery, max 90 lumens, or 10440 Li-ion battery, max 240 lumens.
The driver has: Battery reverse protection. High temperature protection. Low voltage protection.

Reverse clicky switch. Full click to turn on or off, half click (tap) to cycle modes.

Thanks Kevin Manley for the more detailed manual.

Reylight Mini Pineapple Programming Guide

1. Turn on the light.

2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.

a. 1 blink: mode group selection. Press the button to enter this menu.

i. 1 blink: (ML)–2–20–100%

ii. 2nd blink: (ML)–10–40–100%

iii. 3rd blink: (ML)–2–10–50%

iv. 4th blink: (ML)–50–100-strobe-SOS

It then repeats. Press the button during any blink to select that mode group.

b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.

c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.

d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.

e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.

Could not resist. Order placed

I did to.

Rey, you know batteries are allowed in flashlights in all airlines/couriers? Just saying...

Yeah, some couriers. Sorry not anyone I know of.


Couldn’t resist either, thanks.


If the day ever comes that I can resist a 219b SW45K emitter in a Copper body, from a top maker (I love my Reylights!), check my pulse because I’m probably dead. :smiley:


Couldn’t resist since I’ve been looking for a copper AAA light.


Just to make sure, it is AAA, instead of AA. I knew it might be a typo.

Yes AAA, I fixed my post. Thanks for checking!

Is that a spot for a tritium vial in the tail button?

Yes. For $7 Rey will install whatever color you want. I got Ice Blue

Nice looking little AAA light, Rey

Stylish copper body: Check
Useful range of output modes: Check
Warmer emitter with high CRI: Check
Decent UI: Check
Portable and convenient for EDC: Check


Ordered mine last night with a green tritium installed.

Thanks for the reply. I was to do that.

I ordered one! Kind of wish I would’ve kept looking at the posts instead of rushing to buy one, because then I would have seen I could’ve had a trit put in the cap.

Contact Rey, and let him know you want a trit installed. I did the exact same thing you did, and he told me to send $7.00 to his paypal.

Is this any kind of waterproof?