On mine I was running 2 dedomed and one dome on XP-G2’s. The exact measurements (using an external shunt) was 13.45A with 18AWG, tuned down to 11A with 22AWG. I was going for less so I ended up dialing the PWM_LVL back to 200 to give me 8.4A.
That’s huge numbers! I wish I had bench tested this set up before installing it in the light.
Oh man, you should ALWAYS bench test! Even if its a light you’ve built many times before. RMM got on me about this several months back and let me tell you it’s saved me SO MANY headache’s on tiny little things that shoudnt have been an issue at all that had the light been put together would of taken me much much longer to diag & fix.
I just went through that today actually, cost me 2 drivers. So the moral of the story is a good one…benchtest! 
Yup, learned that the hard way too. Comfy recommended to polish the carclo with jewelers rouge on a sheet of paper, I’ll try to find the thread and post a link. Dedomed XPGs also make a nice beam in a Carclo triple.
Now after seeing those pics again, I think I like the 10507 with dedomed better…
I found this and thought it would be a good place to store the find…
Pretty sure I posted that in Chibi’s thread on anodizing Titanium… but as it’s so helpful this is a good place for a backup. 
A refresher…
Nice build LSX. I hate to repeat what everyone said but I to learnt to test and retest after every step to save disappointment. Its about time you invested in a new house with air conditioned garage. 