steady 3 amp driver

[E1320]

@nitro

hi would anyone no where i can find a steady 3 amp driver on a 17mm board if possable

Good luck with that, I would really like to know the answer to this question as well, the closest thing I have found was to do this mod here.

10 x 7135 Driver 4 XM-L

Hi, I have tested much drivers, but none is like i want it (3-mode without strobe and really 3000-3500mA, indifferent which 18650 used....not one 3,2A, other 4,3A) Now i want build my own driver, based on the NANJG 105 and a "addon"...2 extra 7135. I´m no electronics engineer and wan´t to ask, if this is wired ok: [image] (Kaidomain: S009742 + S008618)

There is some more relevant info here as well.

Looking for a 3.5 amp driver on a 17mm board

As some of you may know already my Ultrafire UF980L burned the driver about two weeks ago and no I did not run it on high for more than 2 or 3 minutes at a time. So I am tired of waiting on Jim at Manafont to decide what to do about sending me a new driver or a new light, I really want to use this light this summer and it only works on high mode right now which makes it pretty much useless except for showing off. I have a couple NANJG 105c drivers as spares but I really want 3.5-3.8 amps on high…

Oh and welcome to BLF a lot of great info is to be found here.