Thanks Hank. Just ordered one.
Thanks Hank. Ordered the kit as well as the OTG adapter.
You mentioned there was a video showing how to do it on the phone. Is that on the product page? I don’t see it. Only links to the .hex files.
Emisar D4V2 Flash Kit Instructions (Official How To) this is the thread that has the info for pc and phone.
azhu: Hank Wang:The reflashing kits are for sale now.
https://intl-outdoor.com/emisar-d4v2-reflashing-kits-p-941.htmlI’m not sure if we should offer the OTG adapter, if you already have the OTG adpater, please forget about it.
Thanks Hank. Ordered the kit as well as the OTG adapter.
You mentioned there was a video showing how to do it on the phone. Is that on the product page? I don’t see it. Only links to the .hex files.
Emisar D4V2 Flash Kit Instructions (Official How To) this is the thread that has the info for pc and phone.
Perfect! Thank you very much.
In case you want to update the OP - I measured the idle drain and AUX LED (red) High Current drain - 2.96mA high red AUX, and 20μA idle. Note that that 20 micro ampere drain appeared to “pulse” on and off, presumably as the microcontroller entered and left sleep mode.
The reflashing kits are for sale now.
https://intl-outdoor.com/emisar-d4v2-reflashing-kits-p-941.htmlI’m not sure if we should offer the OTG adapter, if you already have the OTG adpater, please forget about it.
Nice, ordered one and also the OTG adapter
Ordered, thanks!
Has anyone tried swapping SST20 to LH351D?
Are the SST 20 4000K’s a nice tint like those in the FW3A… kinda ‘creamy white’??
Or do have the dreaded greenish tint?
TIA
Has anyone tried swapping SST20 to LH351D?
DB Custom did and I am going to as well
My 2nd one arrived today. Fun with mixing colors.
Are the SST 20 4000K’s a nice tint like those in the FW3A… kinda ‘creamy white’?? Or do have the dreaded (by me) greenish tint? TIA
My SST 20 4000K is a nice creamy white with no hint of green and I can't stand greenish tints in my lights.
My SST 20 4000K D4V2 is slightly greenish. Tint appears exactly the same as my SST-20 4000K D4.
When placed side-by-side with my SST-20 FW3A, the D4V2 is considerably more green in all brightness settings.
teacher:Are the SST 20 4000K’s a nice tint like those in the FW3A… kinda ‘creamy white’?? Or do have the dreaded greenish tint? TIA
My SST 20 4000K is a nice creamy white with no hint of green and I can’t stand greenish tints in my lights.
My SST 20 4000K D4V2 is slightly greenish. Tint appears exactly the same as my SST-20 4000K D4.
When placed side-by-side with my SST-20 FW3A, the D4V2 is considerably more green in all brightness settings.
Hmmm… two different answers on two different D4V2’s. Sounds like it is a tint lottery as to which one gets. :person_facepalming:
I’m not willing to gamble on getting a green tint though….
Thank you for your helpful replys gentlemen….
Received my second D4V2 today. It had this emitter, which appears snow white to my eyes.
Cool White - XP-L HI V3 1A, 6500K
/\ … Thanks Terry….
The D4 will always look a bit more green next to an FW3A because the D4 runs each LED a bit lower power
The D4 will always look a bit more green next to an FW3A because the D4 runs each LED a bit lower power
OK…. but my FW3A with SST 20 400K’s shows no ‘greenish tint’ at all…from moonlight thru Turbo.
Maybe I just got lucky, IDK??
contactcr:The D4 will always look a bit more green next to an FW3A because the D4 runs each LED a bit lower power
OK…. but my FW3A with SST 20 400K’s shows no ‘greenish tint’ at all…from moonlight thru Turbo.
Maybe I just got lucky, IDK??
Then you may or may not see it in the D4 but if you shine them side by side you will likely see “something” different
/\ Thank you contactcr.
I have a Convoy S2+ with a 4000K SST-20 & it is horrible. . It is eat up with greenish tint at all levels.