Yeah looks like they got a pretty good reel. And as the SST20 doesn’t have a lot of tint shift, it’s quite safe to assume that the integrated measurement they did will be quite close to what the hotspot is like.

I’m wondering why these new test reports don’t include the chroma coordinates so we can calculate the duv or how far below the BBL to compare with the 219B. They included that information with the previous 219B and XP-L Hi test reports.

The one Maukka tested was the FB4 tint bin that is being sold at Kaidomain. The FB4 is above the BBL so it has some yellow/green. I’m guessing this might be the FA3 or FA4 bin. FA4 should be very similar to the 219B 9080.

Freeme, do we know which tint bin it is?

Whelp… My SST20 CW is on it’s way. I’m more of a lumen hunter than a tint snob… although I hope the CW tends more towards the 5000k than 6500k. Ah well, it will still be a nice light.

Great to see the SST-20 getting some uptake!

Damnit! I already got one sent to Vinh to fit it with LH351D with an 804 over them. I might just have to get an SST20 hi cri one now too.

Finally we managed to solve ROT66 XPL Hi issue today, so this version will be back on sale next week. Especially big thanks to vihn for giving us very good suggestion.

Some customers who ordered ROT66 XPL Hi have already contacted us and we will take care of all the after-sale service next week once and for all.

For those who have received ROT66 XPL hi , please check the emitters to see if they are in good condition, if you find crushed emitters which would probably have potential fail, please contact us as soon as possible through email or message

Best regards
jack

Maybe vihn has some sst20?

Sorry if it is already written here, but what is ‘Additional Stainless Steel Part’ ? Can I see a picture about it?

Do I receive this now if I make an order (thus, it is offered for people, who initially didn’t receive that), or this is something, which I still need to add into the order, if I would want it?

Technically, you have to do it when you order a light… i guess its too late… you can shoot email to them… ff-light@hotmail.com

They are referring to the stainless steel tail cap. The factory tail cap is made of aluminum. They’re offering the stainless steel version as an option for those that want it just for cosmetic reasons to match the stainless steel bezel.

Well, that’s good news that you’re going to fix this, but I’ve already sent you an email twice to ask for a solution because my order has been at the sorting center since 2018-08-22 17:06 and nothing else happened. but unfortunately I do not get a response from you.

Am I understanding correctly, your light has already been shipped out but it’s at the post office sorting center and you want Fireflies to somehow do something about that?

If that is correct, there’s nothing Fireflies can do. It’s out of their hands.

Where do you enter the coupon code?

On the cart page

Thanks, ordered another one

Yea. Go to shopping cart and add coupon code.

+1.

SST20 this time?

@Newlumen, I think you should remove the coupon code from your pic, just in case.

I can't see where to buy the SS tail cap?