TR-3T6 for $43.69 only on october 19th @ FP

[benckie]

@2100

I agree with Vortex. I only read the description for the dimensions/weight, and sometimes those are wrong too. Even at the end-users end there are so many variables, different DMM, and even with the same DMM I get different readings with 4-inch long probe and 90 cm probe, 4-inch long probe with or without tailcap (switch resistance), with TF Flames we can't be sure whether it's the fake type or genuine type, different charge levels hence leading to different current readings (I always do mine at 4.2V to minimise this case).

The only thing that i pretty much trust is the lux meter doing relative readings.

to many models with fake boob,s and china likes to photo copy to much

one thing i dont get is people moding dmm leads i have a cheap dmm and a fluke dmm they read very close to each other i belive the fluke leads are calibrated with the unit (and should not be changed), i also belive the cheap dmm is to, i have used larger dia leads with less resistance it give higher current draw test on the cheap meter but when compared to my fluke dmm and a friends new fluke the readings are much higher more impressive but to me they are fase as its messed with the calibration of the meter and the meter is giving fase high readings i trust the flukes readings.

i started a thread here about it

https://budgetlightforum.com/t/-/4405#comment-82973

and people should not do current draw test with batteries less then fully charged, but then this again will depend on the charger