Triple host for 20mm driver

[DoNkEyConN]

@skinny_tie

@DoNkEyConN

I’ve ordered an M21A as I have all the parts ready to go to make a C8 triple but the 21700 factor of the M21A appealed to me.

I’m curious which driver you are planning on using as I was just going to use a 17mm BLF x5/x6 driver with an adapter ring.

I want to build a triple with LEDs that have three different CCTs, but rather than mixing them operate them individually. It’s a silly idea but I thought it would be a bit of fun.

I’m planing to use the KZ-3016 driver which switches between three separate LEDs with one mode (1.5A) each. I though the KDLITKER P6-TRI used this driver, but I’ve just noticed that it has two modes for each LED, so I might try to get one of those drivers too.

If I was building a regular triple I’d probably use a BLF A6 driver or a led4power LD-A4.

Are you using a reflector or a spacer and optic for your C8?

It sounds like a cool build! let us know how it goes.

I have a spacer and TIR optic i purchased from Kiriba-ru in this thread Low-cost copper pills, spacers, optics, drop-ins. Custom parts.