Simple Auto CH1 1.2V Ni-MH #1
CH1: LADDA AA Ni-MH 2450mAh (button top)
| Measurement | CH1 | CH2 |
|---|---|---|
| Start Voltage | 1.176 | |
| Finish Voltage | 1.450 | |
| Capacity (mAh) | 2868 | |
| Capacity (Wh) | 3.44 | |
| IR (mOhm) | 44 | |
| Time (h:min) | 03:26 |
I selected Simple and Auto modes to charge a LADDA AA Ni-MH cell from 1.176V to 1.52V. It took 3 hours 26 minutes.
The charge current started at 750mA. It looks like -dV/dt or 0dV/dt termination has been used.
I measured 1.45V after charging finished.
The capacity shown on the display (2868 mAh) looks a bit high for this 2450mAh cell.
Bluetooth connectivity dropped out temporarily so there is a gap for the voltage in the graph.