Simple Auto CH1 1.2V Ni-MH #2
CH1: LADDA AA Ni-MH 2450mAh (button top)
| Measurement | CH1 | CH2 |
|---|---|---|
| Start Voltage | 1.419 | |
| Finish Voltage | 1.448 | |
| Capacity (mAh) | 91 | |
| Capacity (Wh) | 0.10 | |
| IR (mOhm) | 31 | |
| Time (h:min) | 00:06 |
I charged a cell that was almost full using Simple and Auto modes to see what the charger would do.
It looks like there is a short detection stage for the first minute.
The charger then used a charge current of 750mA after detecting an internal resistance of 31 mOhm.
Charging completed after about six minutes.