I will wait for that review, to find out how will it compare to the A60 in the throw department.
It’s neck-n-neck, dude! I was really impressed on the walk tonight! And although it may be behind the A60 a touch in brightness (maybe) and overall fit and finish, the difference is super-slight and there is no heat sag with the Tiger. I really like it so far.
new tank for my ecig, yes I dual weild, the new one is the fancy looking thing on the right
<a href=Photo Storage | Photobucket target=_blank><img src=http://i185.photobucket.com/albums/x48/gords1001/20131008_193621_zps5951e6a3.jpg border=0 alt=>
two and a half weeks cig free now
Congrats on not smoking for 2+ weeks, will you try to quit e-cigs one day?
About 2.5 years without cigs for me (cold turkey).
Went from 40 a day for 17 years to none over night.
It was the day before my birthday and I had failed 10+ times trying to quit before but I had been listening to hypnotic audio mp3s every night for about a week and thought its now or never.
I am still surprised at myself for being able to do it.
After a Canyon S2 and a Nitecore MT1A shipped from China, I just received my third LED light:
A Zebralight H51w from illumination supply sale/promotion. Fast shipping and really nice little light :heart_eyes:
I got:
- Nitecore MT21A from banggood.com
- Ten XP20 Noctigons from intl-outdoor.com
- and five CQG S2s with clip from the group buy (cnqualitygoods.com)
I have got Defiant Super Thrower from giveaway, Thanks Garrybunk.
Defiant Super Thrower compared with HD 2010
Left Defiant Right HD2010
Split and with Eneloops in converts
CQG S1 from group buy.
I got a bunch of these screw gate carabiners different colors and different sizes. Good for keys and such, wouldn't trust them for much else.
http://dx.com/p/naturehike-nh-d-shape-aluminum-alloy-screw-gate-locking-carabiner-black-188528
They tighten up nicely and don't seem to rattle or come loose.
I’m down to 6mg fluids and am happy with nicotine free fluids when I can find them, I also tried one tobacco flavoured fluid and thought “whats the point…”
I use the desert and fruit flavoured fluids, I have a very very sweet tooth, unfortunately I’ve found some really nice mint choc chip and strawberry milkshake flavour, amongst others I like, giving up the treats would be a wrench, plus, playing with the more advanced stuff is much like playing with the advanced torches we play with, its the same sort of addiction to the engineering and technology rather than the nicotine.
As I say, if I can find or mix my own tasty fluids with no nicotine, I’ll be very happy, if not I’ll always order the lowest nicotine level I can.
One good thing is I really really dont fancy a cig at all, go back to that horrible taste and smell? no thanks. If I’d only ordered tobacco flavours id be completely off it now, but the desert flavours are awfully good.
Yesterday I got…
TANK007 PA01
TANK007 PA02
TANK007 HM01 Red
TANK007 HM01 Black
Enlan EM01
Sanrenmu 704
I got one of these yesterday thinking it would make a potentially awesome pocket rocket once I get up to speed in modding but I can't disassemble it. I assume it's glued, but other than the tailcap I can't even see the joints.
Pretty good throw, typical 5 modes, no memory - restarts in high after 10 sec.
Does the bezel ring unscrew? If it does, maybe the reflector comes out and the pill comes out from the front, rather than from the back?
I think H.K. post must have farted had wind and followed through. 
Nothing for weeks then four parcels with six knives. :bigsmile:
Four SanRenMu slipj-oints, an Enlan EL-01KH and a big folder - a Harnds CK7006 Blazer.
I can't see a joint, bezel/head or head/tube. I have places I suspect but can't see for sure and nothing budges using bare hands. I hit it with some WD-40 as it has great solvent power to no effect. Pretty nice as is, but I suspect it could be a real head turner. A 26700 Moli fits without a hitch.
Do you have nitrile (kind of like thin rubber or latex) gloves? Or maybe those rubber like pads that they sell to open jars? If you do, try using them to get better grip on the bezel and head to turn it.
EDIT: I just noticed the Ebay seller is “poozoo”. You might try messaging them via Ebay and asking. I’ve bought several (other) lights from him/them, and they’ve always been helpful.
I usually have pretty good luck holding the bezel in a vise using a pair of soft jaws like these Bessey ones:
Then I can either turn the light body by hand, or use a pair of pump pliers with soft jaws to unscrew.
Yesterday, i got this, ordered 24.9. shipped 4.10. got here in 5 days!
Today i got this, ordered 24.9. shipped 4.10 was at customs office for one day, also got here in 5 days!
My record till now was 8 days 
I got with a rubber jar opener. I'll take some photos and start a new thread. Thanks.
Got my Innokin Ucan today.
This thing is SOLID! No internal bottle to worry about. Should have taken it apart before I filled it to see how it works. But so far, I love it.
Ordering another this weekend, so if anyone is interested, I can take it apart and see what all is in there. I am assuming it is just o-rings, and when you depress the button it allows air in to allow it to drip out the tip... but may be wrong
Got my Glo-Toob and Kubotan today.
