What you got today

LED Flashlights – General Info
9994
  • Convoy C8+ SST-20 (4000k)
  • Convoy C8+ XPL Hi - V2 1A
  • Convoy S2+ SST40 (5000k)

9995

Wish you were in states and I could convince you to sell or trade one of them. I have micromineral specimens that have not seen light of day in years as all I have anymore is a 10X loupe to look at them. Always meant to find a good used binoc scope.

I have plenty of lights now to illuminate them :slight_smile:

9996

I’ve got a Skywolfeye B16 AAA zoomie.
The first impression is very good, I like the looks and I really like the large optics relative to the head size.
UI is as bad as it gets, next mode memory with strobe in the loop.
Agry blue emitter.
The clicky switch is very loud.
There’s alu pill.
The driver surely needs a swap if this light is to receive some serious usage. I tried to disassemble the pill but the driver is glued.
I failed to remove the plastic washer that obscures the front of the PCB and I’m not sure if the LED is placed on the same PCB as the driver or is it separate.

I intend to try 10440 with it but just not yet - I don’t want to kill it just yet.

So…it may or may not be a good host, some more force is needed to tell and I don’t want to kill it just yet. :wink:

Anyway, it’s going to be my main light for the following (few?) days.

9997

I got two red laserpointers, bought them for work, students will use them for physics experiments. Laserpointers of this type are very difficult to find: working on a single AAA cell and they have a tailclicky so that they can be used continuously. As a bonus the batteries do not drain spontaneously in a week, like cheap 2xAAA laserpointers all do, they have terrible parasitic drain.

I bought them on laserkopen.nl, what I think is a dutch-language store of Jetlasers.

Edit: Raccoon, where art thou! :open_mouth:
Edit2: too late :frowning:

9998

I got one of these at some point, it is nice because squeezing the pocket clip completes the circuit. Otherwise it’s a standard 2xaaa red laser

9999

I got a FT03 SST-40 5000 K DOA. :cry: Just a short flicker and it was (almost) dead. Banggood order stuck in "processing" – email address issues?! - #47 by SammysHP

10000

I have a CU MF01 mini in the mailbox right now

10001

Yeah!!! 10.000 posts

I received a 12v 36w e27 led bulb for my 12v setup

10002

You don’t until you show some pics :expressionless:

10003

djozz, any clue if they sell internationally?
And…do they have green ones?
Thanks in advance!

10004

In the last few days, a 5000K “Army Green” FW3A, a “Sand” 5000K MF01 Mini, an Olight i3UV, and a bright green A01. (And a Beretta Nano for the wife, lol.) :person_facepalming:

10005

They do not have green ones of this type, just red. And although the site seems tied to Jetlasers, the international shop, jetlasers.org, does not carry the same selection.

10006

I need to take my words back, it got some real use and it never started with stroble. So it’s not a pure next mode memory though I don’t yet understand the way it works. Frankly, I don’t care much. Anyway, the UI is bad but passable.

10007

It does seem pretty nice, almost wish I got the brass one too.

EDIT: Photos -


10008

All these toys from last month.
Firefly V2 CU+Ti Nichia 219b
RovyVon A8 219c
Fenix Titanium Snap Hook
Titanium EDC utility knife
Custom Titanium Zippo Case with Butane Lighter Insert
(I don’t smoke, just for in case of emergency!)

10009

K75
and the bezel is not glued :partying_face:

10010

A poncho liner in MultiCam Alpine (snow camo).

10011

2 pcs Nichia UV 365nm with Cu mcpcb. Same as Simon uses in his S2+. But not from him, he does not sell separately.

10012

Hmm, double-edged knife, also looks like it’s OTF. The first half I wouldn’t find useful, the second half my local LEOs would take issue with :wink: Digging the Ti aesthetic though

10013