【Wurkkos HD10 update】HD10 update flashing pad and orange is on the way

[ebastler (Moritz)]

Once I tested it I will publish the sources on GitHub, free for everyone to modify (KiCad 8.0 file format) or order (Gerber files).

More info here:

[Review] Wurkkos HD10 - A great formfactor Anduril 2 90° headlamp

PCBs arrived today, but the fab sent me the wrong thickness. I had ordered 1 mm, they sent me 1.6 mm. The post is 2mm tall, with a layer of double sided tape below and the solder joints on top it’s now very tight. No issue with the OG button top, but I’m not sure if it would work with flat tops anymore [PXL_20240610_191120308] At least they fit: [PXL_20240610_190213646] And work: [PXL_20240610_191047035]

My teardown and explanation of how to access the pads here:

[Review] Wurkkos HD10 - A great formfactor Anduril 2 90° headlamp

Modding, reverse engineering and bugfixing After plenty people asked, I decided I would risk my light to try and disassemble and bugfix it. So, let’s deep dive into the guts of a HD10! Disassembly The light is surprisingly easy to take apart - When you unscrew it, you see a second vertical daughterboard protruding through the driver board. This is the MCPCB. It is held in place by 6 solder joints to the LEDs. [mcpcb] The MCPCB can sadly not be removed without removing the bezel, which is pre…

My full review of the light here:

[Review] Wurkkos HD10 - A great formfactor Anduril 2 90° headlamp

Hello! Welcome to my short Review of the Wurkkos HD10 - a 90° 14500 headlamp with Anduril 2. Introduction First of all - this review is based on a pre-production unit. I can not guarantee that the final product will look, feel or perform the same way. This review unit was sent to me free of charge by Wurkkos (thank you very much, @Wurkkos_Terry!). I was not paid for writing this review outside of free access to a sample light. This is actually a very interesting light for me. I had been wai…