XM-L2 U3 available at IOS ~ The real McCoy

[RaceR86]

You and others might want the check what RMM just posted about these emitters as well.

Ill just quote him:

@RMM

Yesterday it was brought to my attention that at least some of the U3 LEDs will not pull full amps when used in a 4A+ light. Since then, I have talked with IOS extensively, heard feedback from several customers, and have conducted some testing myself.

Here are my preliminary findings:

• The majority of the U3 1A & 2A LEDs appear to be affected
• • A few of the other emitters may have also been affected, but not all of them
• The issue is not with the MCPCB; it is with the LED itself
• The affected LEDs will only pull about 5A direct drive (at least 1A lower than expected)
• The output at 3A-4A seems to be alright

I want to make sure that you got what you paid for. If you bought one or more of these LEDs, and it is not performing as expected, you will have the choice to either

• Return the LED(s) for a full refund, with pre-paid return label; or
• Receive a $3 refund per LED, and keep the LED(s).

If you believe you have an affected LED, please send an e-mail to mountainelectronics at gmail dot com with the following information:

• Name
• Order number
• Description of the problem with affected LED(s)
• Whether you would like to return the LED(s) or receive a partial refund.

Thank you for your support.
Richard