Grade CH1 3.6V Li-ion #2
CH1: XTAR 18650 3.6V Li-ion 4000mAh (button top)
| Measurement | CH1 | CH2 | CH3 | CH4 |
|---|---|---|---|---|
| Start Voltage | 4.202 | |||
| Finish Voltage | ? | |||
| Capacity (mAh) | ? |
I tried Grade mode for an XTAR 18650 3.6V Li-ion 4000mAh cell and it continued to repeat the Charge-Discharge-Charge cycle.
The current cut out for a minute when the voltage reached 4.213V at the end of the first Charge-Discharge-Charge cycle (shortly after 12 hours). The VX4 then started discharging again at around 290mA.
EDIT:
I tried Grade mode again and it worked properly.
CH1: XTAR 18650 3.6V Li-ion 4000mAh (button top)
| Measurement | CH1 | CH2 | CH3 | CH4 |
|---|---|---|---|---|
| Start Voltage | 4.206 | |||
| Finish Voltage | 4.130 | |||
| Capacity (mAh) | 3993 |
The VX4 successfully measured the capacity of the XTAR 18650 4000mAh cell. It displayed “done” and stopped. The capacity measured was 3993mAh.