Nichia E17A/E21A Skilhunt H04RC Group Buy

216 posts / 0 new
Last post
Luminosity
Offline
Last seen: 1 week 2 days ago
Joined: 12/27/2017 - 10:20
Posts: 61
clemence wrote:
Luminosity wrote:
Can I still get in on this buy? Interested in an H04 with E21A in 3500K.

Already added to the list.

[Clemence]

Thank you! Payment sent via PayPal.

Watermanchris
Offline
Last seen: 6 hours 43 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

@clemence – did you see my most recent addition? 3 × 2000K + 1 × 3000K E21a H04? You should have a deal where if you order 5 the sixth one is 50% off. You would have to exclude the first 25 that were $60.

You would get sickos like me ordering 24! Big Smile I figure these will end up being very popular so I figure I can always pass on anything I don’t use.

hodor
hodor's picture
Offline
Last seen: 8 hours 29 min ago
Joined: 07/11/2018 - 03:58
Posts: 603
Location: UK
clemence wrote:
hodor wrote:
Hi Clemence, just wanted to check it’s ok to change my additional modules before adding comments to spreadsheet? Thinking about tint mixing.

OK, go ahead

Added comments to my order, thanks!

(changed main module and extras)

808Hi
Offline
Last seen: 1 hour 14 min ago
Joined: 01/21/2018 - 04:30
Posts: 301
Location: Hawaii

added modules and lenses to my order #24. PP payment sent.

anonymous_user
Offline
Last seen: 4 hours 15 min ago
Joined: 05/23/2019 - 21:59
Posts: 181
Location: CA, USA

Hey clemence I don’t know if 808Hi actually has two orders or just one but I believe order #24 is mine not his. Please move the modules to order #23 and change the username back to anonymous_user. Thank you.

clemence
clemence's picture
Offline
Last seen: 2 days 3 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia
anonymous_user wrote:
Hey clemence I don’t know if 808Hi actually has two orders or just one but I believe order #24 is mine not his. Please move the modules to order #23 and change the username back to anonymous_user. Thank you.

Confused here. Let’s continue by whatsapp. I sent you a PM

[Clemence]

clemence
clemence's picture
Offline
Last seen: 2 days 3 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

Extended GB Listing is now closed. Thanks for all the orders.
Please DOUBLE check the Gsheet and confirm everything there.

[Clemence]

hodor
hodor's picture
Offline
Last seen: 8 hours 29 min ago
Joined: 07/11/2018 - 03:58
Posts: 603
Location: UK

I see you updated my main LED but not the extras.

clemence
clemence's picture
Offline
Last seen: 2 days 3 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

hodor wrote:
I see you updated my main LED but not the extras.

done!
Watermanchris
Offline
Last seen: 6 hours 43 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

I don’t see my 3 × 2000K + 1 × 3000K E21a H04 on there yet.

Sloth
Offline
Last seen: 1 week 5 hours ago
Joined: 10/08/2019 - 05:50
Posts: 15

Thanks for being around for the last minute add.
Glad I didnt miss this. Payment sent!

clemence
clemence's picture
Offline
Last seen: 2 days 3 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia
Watermanchris wrote:
I don’t see my 3 × 2000K + 1 × 3000K E21a H04 on there yet.

Done

clemence
clemence's picture
Offline
Last seen: 2 days 3 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

There was a problem for the #23 and #24 listing. To avoid complication and sacrificing #25, I opened up one more slot for the first $60 because #23 bought 2 pcs while I confused if it was #23 or #24. All settled now, waiting for #23 to relist his order.

[Clemence]

clemence
clemence's picture
Offline
Last seen: 2 days 3 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

Bad news: “…I am currently out of the office on holiday.
Since the outbreak of Wuhan, our holiday will extended to 2020-2-17….”

Good news: GB listing extended for another 7 days until further notice

[Clemence]

hodor
hodor's picture
Offline
Last seen: 8 hours 29 min ago
Joined: 07/11/2018 - 03:58
Posts: 603
Location: UK

Are there any good hosts for E21A (or E17A) modules?

Watermanchris
Offline
Last seen: 6 hours 43 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

hodor wrote:
Are there any good hosts for E21A (or E17A) modules?

Pretty much anything that will take a 16mm MCPCB as I understand it.

I plan to get some E17a quadrix to file down and put in a few Tool AAs but a Convoy S2+ or similar is probably the easiest for E21a

hodor
hodor's picture
Offline
Last seen: 8 hours 29 min ago
Joined: 07/11/2018 - 03:58
Posts: 603
Location: UK

Would an E21A module fit in a FW1A? As it’s a quadrix I assume it should be able to handle the amps, especially with a GA/35E cell?

Watermanchris
Offline
Last seen: 6 hours 43 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

hodor wrote:
Would an E21A module fit in a FW1A? As it’s a quadrix I assume it should be able to handle the amps, especially with a GA/35E cell?

I was thinking about doing the same thing and using the FW3A bezel with a pebbled TIR but Clemence advised against using an FET driver with E21a
Watermanchris
Offline
Last seen: 6 hours 43 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

hodor wrote:
Would an E21A module fit in a FW1A? As it’s a quadrix I assume it should be able to handle the amps, especially with a GA/35E cell?

The Armytek Prime series “XP-L” are pretty good and very reasonable with the BLF35 discount code.
Chinaheart
Chinaheart's picture
Offline
Last seen: 15 hours 38 min ago
Joined: 07/19/2019 - 22:56
Posts: 177
Location: Philippines

Is there a chance to offer a short tube compatible for H03 and H04

Pavlo
Offline
Last seen: 4 hours 31 min ago
Joined: 12/13/2015 - 10:37
Posts: 631
Location: Canada

It would be great if Skilhunt makes an 18350 tube for the H03/H04. I would get one as well.

Watermanchris
Offline
Last seen: 6 hours 43 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

They are really lightweight even with the 18650 tube. I would probably never use the 18350 tube . . . Although that wouldn’t stop me from buying a few. Big Smile

SKV89
Offline
Last seen: 1 hour 47 min ago
Joined: 12/10/2017 - 12:46
Posts: 3569
Location: US

18350 tube is actually really useful when going on trips. I leave on my Tiara Pro E21A 2000K in the hotel bathroom at night time for bathroom trips because hotels usually don’t have night lights and their light switch turns on fixtures that are much too bright. The magnet on the Tiara makes it extra useful because I usually hang it on the wall or upside down on ceiling fixtures. 18350 lights are so small that it doesn’t hog up any space and don’t feel it in my pocket making it excellent for trips or EDC.

paikeam
paikeam's picture
Offline
Last seen: 3 hours 51 min ago
Joined: 02/15/2020 - 13:03
Posts: 1
Location: france

Hello here !

Just added the #76th for a quadrix E17A 2700K and a module quad E21A 2000K. And paid.
Can you confirm everything is allright ?

Folomov EDC C1 (E21A) ; LumensFactory Seraph SP-6 D26 HO-4/XPL3000K ; Convoy S2+ (XML2 3000K) ; Astrolux S43 (219C 5000K)
Maglites : 2D ; R6 MiniMag ; Solitaire

Watermanchris
Offline
Last seen: 6 hours 43 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

I agree. I wish Zebralight and Skillhunt made 18350 lights or tubes that could be lego’d but I would mostly use 18650 still. The power to mass ratio is just too good

Tumbl3s
Offline
Last seen: 4 days 43 min ago
Joined: 10/23/2019 - 10:50
Posts: 19
Watermanchris wrote:
I agree. I wish Zebralight and Skillhunt made 18350 lights or tubes that could be lego’d but I would mostly use 18650 still. The power to mass ratio is just too good

ZL is made from one piece of aluminium apart from the tailcap – that’s one of the selling points. Entire light would have to be cast in 18350 size.

Watermanchris
Offline
Last seen: 6 hours 43 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

Yes. I know but I would buy an 18350 version of the SC64w HI or H600FC if they made it. They could also make an 18650 “tailcap” or an extension tube

clemence
clemence's picture
Offline
Last seen: 2 days 3 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

Sorry, was very busy with life. I will update the gsheet tonight. I hope we can proceed the order to Skilhunt on Monday.

[Clemence]

clemence
clemence's picture
Offline
Last seen: 2 days 3 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

UPDATE 200217: China holiday extended to 200224 due to health and safety concern of corona virus outbreaks. GB listing reopened until the factory go back to normal operation.

[Clemence]

Rayoui
Rayoui's picture
Online
Last seen: 5 min 2 sec ago
Joined: 08/06/2019 - 00:38
Posts: 182
Location: Portland, OR

Understandable, but I wonder if they are just going to keep extending the holiday forever. The virus outbreak isn’t going to be over by next week.

Pages