Thanks, that gives a great comparison of size.
I hope you don’t mind that I cropped and brightened your photo.
No pressure from me. Its done when it’s done. :+1:
Ok, just got a light done for goshdogit. It is a Green MT09R with the TA special, 4000k 80CRI, TA driver, 50% ramp, spring bypass and tailcap washer.
It is doing 20k lumens all said and done.
It should ship tomorrow.
Thanks! :+1:
I plan to post some beamshot comparisons with other lights when it arrives.
Sounds good! I know a lot of people want to see that.
Ok, it just so happened to work out that the last driver I have on hand right now matched up with the last light that is paid for right now (I have a few more here that the owners are still deciding what they want).
This one goes to Sherbona, it is a Blue MT09R also with the TA special. XHP70.2 4000k 80CRI LED’s, TA driver, 50% ramp, Springs bypassed and tailcap washer.
This one is also doing 20k lumens.
If TA is getting board guys I still have 4 more right here ready to ship to him. I have 1 more coming from a customer I shipped the wrong color by mistake.
Once these colors are gone there will be no more of them. And once this shipment is sold out you will not be able to find them again at the discounted price I've been letting them go for...
Just letting ya know.
How easy is it to access the MT09R driver? I’ve heard that the Q8 has long wires to the driver than means you can attach a clip to reprogram it without resoldering. Is this possible on the MT09R or if not, TA could you mod one to make driver access easy?
The reason is I have Andúril on my D4 and I want to mess around with the firmware but I don’t think the D4 will survive my soldering skills another time. I was going to get the Q8 but if Andúril might work on the MT09R then I’ll get 1 of them instead.
The MT09R is easy to flash, the way I solder the wires it flips right out for easy reflashing.
Not sure how the factory will solder them but it should still be able to flip out, might not be quite as easy to get to.
I plan to try TK’s firmware as soon as she has a version that will work with these drivers (and after I finish the spheres, everything else is kind of on hold at the moment). Think she is pretty close.
TA I hope it is okay that I leave this right here for a bit.
Okay guys I decided to give a few lucky people a super deal on the MT09R 70.2 (which will still need a driver ordered from TA and installed or I can ship it directly to TA for you)
Also I am doing the same with 1 each of the SC01 and the SC02 and, I have a 35 high that is complete and ready to ship directly to a customers that already has the new TA driver in it.
It is the same 35 high that I used in the video that I light up the water tower from 822 yards. The price on it is stupid low.
So I have 2 MT09R 70.2 units green color NW emitters that I now have priced at $100.00 on my website you can find here https://hesaidshesaidsales.com/shop?olsPage=products%2Fhaikelite-mt09r-triple-cree-702
I also have just 1of the MT09R 35 high I just mentioned that is complete and ready to go. I have already installed the new TA driver in it and it is easily a 1000 meter thrower. I have it priced at $110.00 you can find it here https://hesaidshesaidsales.com/shop?olsPage=products%2Fhaikelite-mt09r-triple-cree-35-high
I have 1 SC01 black color that is on sale just this once at $29.99 you can find it here https://hesaidshesaidsales.com/shop?olsPage=products%2Fhaikelite-sc01 and also 1 SC02 white color (actually they are silver) also on sale just this once for the same price of $29.99 you can find it here https://hesaidshesaidsales.com/shop?olsPage=products%2Fhaikelite-sc02-5000k-emitter-tint-color-white
There is nothing at all wrong with any of these lights. I just feel like giving some people the chance at a stupid great price but only in these very limited numbers. Once these on sale lights are gone the prices will go back tor their prior price.
The prices include shipping. If you want the MT09R shipped to TA please email me at hesaidshesaidsales@charter.net and let me know you want it shipped to him along with you BLF username as well please.
Thank you all for all of your support and I hope in the future to be able to continue deals like this from time to time.
These MT09R 70.2 lights are a monster of a light after the TA driver is installed so the price I am letting 2 of them go for really is almost nuts. I will make about 8 or 9 dollars after shipping so, I would hurry. I would be willing to be that someone will be getting these really quick.
Thanks again.
Holy mother.
If these were the blue ones, I would’ve bought another one.
If HL would pay me I would buy them and then have them on hand pre-modded for when someone wants one.
Out of blue but at this price you can buy it, mod it and still re sale it and make money.
Okay one gone... 1 left
Nice…sold like hot cakes!
Tried for the green…sold….>sniff<
Haikelite should sell blue and greens…never mind the black…those colors rock!
You could sell $100 blue and green ones (with TA drivers to be installed) all day long!
TA’s work sends it out of the ballpark!
Got the green. Now I got all colors.
Thank you Terry.
You gimme that!
Woo hoo (again), thanks! I’m looking forward to it. I did receive the 3000k green one earlier and I love it, nice work. I’ve been working some long hours this week so all I can say so far is that it lights up the living room beautifully 
Could you post a beamshot?
Would be interested to see how it looks at 3000k.