What’s the 4th light from the left?
Acebeam TK16 copper version
Nice edc collection Geuzzz
Thanks guys!
Hoping to get some inspiration for my next lights by other lineups.
Chatika vas Paus:But not with 18350 tubes.
I wish to get all of them with short tubes. For now I have only D4v2. Waiting for KR4 with mule e21a. Duno where to buy short tube for EDC18. FW3C with short tube is on my wish list.
[…]
I think it’s a good idea. There have probably been several threads asking for comparisons. I recently made one photo for a friend who wanted to compare M43 to other soda can flashlights. If you are going to change this thread into a general thread, I will share this photo.
Thanks Chatika Vas Paus!
Hum, the 18350 is already available, maybe on BG or through Neal. The member maba already showed it in and EDC18! I didn’t search for it yet, because I wanted to have this comparison to put some things in perspective@ Chatika and @ Geuzzz
I can change the title of the thread later to make it non-specific request. What do you say?
Then people can post their comparison requests :+1:
I promised myself not to buy on BG anymore, and Neal shipping is free over $50. Maybe someday I’ll order something…
Btw, Here is the photo I mentioned earlier
I will enlarge it if you decide to change the title
Nice lineup Chatika vas Paus!
I promised myself not to buy on BG anymore, and Neal shipping is free over $50. Maybe someday I’ll order something…
Btw, Here is the photo I mentioned earlier
I will enlarge it if you decide to change the title
Well, I’m still looking for the initial line-up, but I’ll change the tittle and edit OP. :+1:
EDIT: Done :partying_face:
Ok. So let’s post some edc light size comparison lineup’s.
very nice lineup :+1:
added the carry weights of the ones I know:
Bumping this up to check if someone (already) has :
D4V2 vs KR4 vs FW3A vs EDC18 in the 18350 format
Ok. So let’s post some edc light size comparison lineup’s.
Hi Geuzzz,
Would appreciate if you can let me know the brand and model of those 3 flashlights in your pic here.
From the left,
no.3 (silver & copper)
no.5 (silver)
no.8/9 (silver & gunmetal)
Thanks!
you folks have really nice flashlight collections! those tiny ones look cool.
Geuzzz:Ok. So let’s post some edc light size comparison lineup’s.
Hi Geuzzz,
Would appreciate if you can let me know the brand and model of those 3 flashlights in your pic here.
From the left,
no.3 (silver & copper)
no.5 (silver)
no.8/9 (silver & gunmetal)
Thanks!
Of course:
Emisar D4 v2 titanium/Cooper
Eagletac D25c titanium
Enogear or Fireflies Stainless steel AA
I heat treated one of the enogears for the gunmetal look.
Ok thanks for the info!
Nice collection you got there.
Ahah. that is nice :heart_eyes:
Thank you very much for posting Chatika vas Paus! That was the missing comparison I wanted to see for a while!
BTW, I assume that one is a D4v1 and the other the V2 (longer tailcap), am I correct?
Also, it surprises me to see that the EDC18 is not longer than that much longer than the D4’s.
Thank you very much once again and congrats on your collection :+1:
Your welcome. Yes, you are correct. White D4 is V1, gray D4 is V2.
Your welcome. Yes, you are correct. White D4 is V1, gray D4 is V2.
Thanks again and thanks for confirming it
I guess I’m still on time to get and EDC18 or a D4V2.
My D4 v1 is now dismantled, I used it’s driver yesterday to put in an headlamp, so I may try a D4V2 :+1: Or get a driver and switch for it and put it back to work
Let me know if you want to get rid of D4v1
Let me know if you want to get rid of D4v1
I’m, still checking if I can get a new driver/switch for it, but if not, I’ll contact you. :+1:
Would you be interested in the host only?
Yes, only host. But complete light would be great too.
Hank sells new (white) drivers for $12. Rings, rubbers and buttons $1/pc.