Nice lineup Chatika vas Paus!
Well, I’m still looking for the initial line-up, but I’ll change the tittle and edit OP. :+1:
EDIT: Done :partying_face:
very nice lineup :+1:
added the carry weights of the ones I know:
Bumping this up to check if someone (already) has :
D4V2 vs KR4 vs FW3A vs EDC18 in the 18350 format
Hi Geuzzz,
Would appreciate if you can let me know the brand and model of those 3 flashlights in your pic here.
From the left,
no.3 (silver & copper)
no.5 (silver)
no.8/9 (silver & gunmetal)
Thanks!
you folks have really nice flashlight collections! those tiny ones look cool.
Of course:
Emisar D4 v2 titanium/Cooper
Eagletac D25c titanium
Enogear or Fireflies Stainless steel AA
I heat treated one of the enogears for the gunmetal look.
Ok thanks for the info!
Nice collection you got there.
Ahah. that is nice :heart_eyes:
Thank you very much for posting Chatika vas Paus! That was the missing comparison I wanted to see for a while!
BTW, I assume that one is a D4v1 and the other the V2 (longer tailcap), am I correct?
Also, it surprises me to see that the EDC18 is not longer than that much longer than the D4’s.
Thank you very much once again and congrats on your collection :+1:
Your welcome. Yes, you are correct. White D4 is V1, gray D4 is V2.
Your welcome. Yes, you are correct. White D4 is V1, gray D4 is V2.
Thanks again and thanks for confirming it
I guess I’m still on time to get and EDC18 or a D4V2.
My D4 v1 is now dismantled, I used it’s driver yesterday to put in an headlamp, so I may try a D4V2 :+1: Or get a driver and switch for it and put it back to work
Let me know if you want to get rid of D4v1
Let me know if you want to get rid of D4v1
I’m, still checking if I can get a new driver/switch for it, but if not, I’ll contact you. :+1:
Would you be interested in the host only?
Yes, only host. But complete light would be great too.
Hank sells new (white) drivers for $12. Rings, rubbers and buttons $1/pc.
Yes, only host. But complete light would be great too.
Hank sells new (white) drivers for $12. Rings, rubbers and buttons $1/pc.
Oh, thanks for the information on that, gotta check it
I was asking because the switch is gone (puft, really), the driver is now on the Acebeam H20, and I will reuse the leds because those XP-G2 are the rosy one.
But if I can, I will get things back together, specially if Hank sells those parts to me.
But I will keep you posted depending on that :+1:
Hank doesn’t have an aux board for v1 which has 21mm mcpcb.
If you are interested, you can use my project. Already tested, everything works.
And here are the leds I used (cathode) - link
Hank doesn’t have an aux board for v1 which has 21mm mcpcb.
If you are interested, you can use my project. Already tested, everything works.
And here are the leds I used (cathode) - link
Thanks for the links and for your work!
Even if I get the new driver, i am not sure if I will venture myself on this, as normally I tend to screw these small solderings quickly
But now I know I have an option on that, thanks to you :+1:
I ordered a driver from Hank for my D4v1, so I guess I will try to make it whole again! In case anything fails, or in case I figure out I want to sell it, I will let you know , Chatika vas Paus
Nice comparisons there, Chatika vas Paus. I didn’t realize that the EDC18 w/18350 tube would be so close to the FW3A.
I had an FW3A with 18350… but somehow lost it. It’s so small! And with no clip, I’d installed a lanyard ring and put a mini carabiner-like clip on it. Still haven’t exhausted all places (I’m a bit of a clutter bug)… but yeah, when I convert my other FW3A to 18350, I’m going to be sure it uses a clip onto a belt-loop.