Host kit…and some of those triple or quad DTP boards…booyah!
Very very very nice and sub $20…I see many a special build with these in the near future…heck just the basics will make it one heck of a good daily driver!
and to the guy making the custom heatsinks…I’m in for at least 1, maybe 2!
While it’s not in the other pictures or the component list, the final picture shows a switch boot. Can you confirm that a switch boot is included? Thanks for posting this kronological!
Ok, I got the host kit in and I am VERY unhappy. This is how it was packaged:
Everything tossed loose in a bag, the whole thing was rattling inside the package wen I picked it up from the postman. Just watch the reflector directly in contact with the clip and you know what I mean :Angry:
This was the content of the package. NO LENS IS INCLUDED AT ALL!!! And note just one little screw, why would that be?
Ah, one screw is because there's just one screwhole (???????????) And look at that reflector! The X6 has one of the best reflectors I have ever seen, unless of course if it is scratched like this :Angry:
Banggood, I know that this was not an expensive host, but you ruined it before shipping: get your packaging sorted!!!!!
Soooo, now on to getting the replacement done, contact BG, get them to understand my problem, try again, and again, reject their proposed solution because it is way insufficient, etc., etc., etc., :Tired:
This just sucks, i hadn’t ordered yet but i plan to, i really hope that it will be sorted out by then because this bad packaging + no lens and why only one hole……it is just messed up
This is really bad news…….i guess if the hosts can’t be relied upon. it is the EE x6 that is the next best thing, but on that the shelf is a different hight than the blf x6 so thats an complication for the possible blf x6 triple spacer……….
That really sucks, Why would they ship the host like that? I already bought that host last week, hope i will receive it not like that.
Before i buy the host i already noticed in the picture on the product page that there is only one screw, now you confirmed it that there is really one screw and one screw hole.
The title of this post says “Eagle Eye X6 host kit w/AR lens, tapped holes and screws.” kronological specifically asked Neal about both of those issues, since we had brought them up here for him. Ironic that there is NO LENS and only one tapped hole and one screw! And what in the world were they thinking putting all the loose parts in a baggie together? Well, if ever I had any faint amount of interest in this host, it has all evaporated now! I’m glad my BLF X6’s came in decent condition.