Fenix E12: 14500, tiny10 FET, XP-G2, 40* TIR. Finally completed!!

64 posts / 0 new
Last post
wight
Offline
Last seen: 2 years 11 months ago
Joined: 11/27/2013 - 16:40
Posts: 4969
Location: Virginia, USA

Heheh, that makes a lot more sense to me. After trying on-time w/ memory disabled I was flabbergasted that you could find that appealing. Very difficult to use w/ no upside I could find!

Still fine, still on a break. One day I’ll catch up with you folks! previous wight catchup Wink
list of my drivers & variants (A17DD, FET+1 stuff, WIP stuff, etc)

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 3 years 1 month ago
Joined: 07/22/2013 - 13:10
Posts: 4005
Location: Ohio

I’ve got the preflash issue figured out however there’s no way I can fix it on this light with a tiny10. I was getting the same preflash on my TC300 (w/MT-G2 and BLF20DD) so I put a 10kohm resistor on R4 and it totally solved it!

I’m going to try to file the “wings” fenix uses into a 17DD and make it fit direct so I can have a pull down resistor (unless switching to a BLF10DD V1.2 fixes it once they come in)

 RIP  SPC Joey Riley, KIA 11/24/14. Now I am become death, the destroyer of worlds.

wight
Offline
Last seen: 2 years 11 months ago
Joined: 11/27/2013 - 16:40
Posts: 4969
Location: Virginia, USA

Cereal_killer wrote:
I’ve got the preflash issue figured out however there’s no way I can fix it on this light with a tiny10. I was getting the same preflash on my TC300 (w/MT-G2 and BLF20DD) so I put a 10kohm resistor on R4 and it totally solved it!

I’m going to try to file the “wings” fenix uses into a 17DD and make it fit direct so I can have a pull down resistor (unless switching to a BLF10DD V1.2 fixes it once they come in)


Is R4 the gate pull-down resistor? Looks like it to me at a glance. If so, it seems to me that you have space to do that on the tiny10. On the FET side of the board you just put the resistor between the GND ring and pin 1. Maybe right around where the board is marked U2.

Still fine, still on a break. One day I’ll catch up with you folks! previous wight catchup Wink
list of my drivers & variants (A17DD, FET+1 stuff, WIP stuff, etc)

Pages