My anti-static bag has a similar looking label, but says “LEDLAMPS” at the top and has the information that is in the Description section of that Ebay ad. So as snakebite says, if the description is accurate, those are the LED’s you want. If the picture is accurate, those are not the LED’s in the OP.
Anyone know if these are the right thing? How do we know they are in fact high CRI, I didn’t see it mentioned in either the old ad or this one?
I would not mind having some neutral/warm white high CRI 5mm LED’s around. I figure I can rebuild some of the many 9 LED lights I have laying around if nothing else.
I can confirm after ordering then that these are NOT high CRILED’s. Just you basic 5mm cool white LED’s. Nothing notable at all about them, looks just like the ones in the picture.
I guess the search is still on for a real supplier of them.
seems all the sellers went away then came back at once.since they all use the same pics and sell the same photo lights the leds are the same.
if so now is the time to load up once these 2 orders arrive and are what i got when i posted these.
my orders came very fast.
Ebay store from OP can’t accept payment, so I have messaged seller and he sent me paypal invoice directly to email. Not exactly by ebay’s book, but I don’t have any doubts since invoice was for service, covered by paypal protection. Now the waiting starts, I just hope these can replace horrible blue led in Nitecore Tube.
they do shoot a bit of light out the back.
i spraypaint my boards white before installing the leds.
a radioshack round prototype board loaded with 36 of these parallel with a .47 resistor in series works great in a versapak flashlight.
and can double as a video light.i shot some video of the first startup of a friends chevelle we rebuilt with that light.minimal glare off chrome valve covers,ect.
L4M4 wrote:
I built myself some little Modules for photography – they are extremely good.
I would say, the CRI is easily over 90 and they are perfect for lighting stuff for photos or in glass cabinets
Put one of these LED’s in one of these lights. First tried a Red LED, but just couldn’t see what was needed. With this LED, got about 1/2 lumen of perfect light that didn’t wake me up or run my night vision. Thinking about putting in a “Police” light to get a little more concentration of light from the reflector. On a side note, if you haven’t played with those motion detectors, you should. They are so easy to use and have a lot of potential uses since they can take up to 24v.
I just got my order in, they have the correct part number and look like the ones in the pictures earlier in the thread but mine at least are not warm tints. They are not ice cold but I would say 1A/1D ish tint. The CRI also appears to be average, compared to my BLF348 there is no comparison in the color rendition but that could also be partly the tint.
Maybe they ran out of the ones you got or sent you the wrong thing?
These are still pretty nice LED’s for what they are, just not what I was hoping.
Anyone know if these are the right thing? How do we know they are in fact high CRI, I didn’t see it mentioned in either the old ad or this one?
I would not mind having some neutral/warm white high CRI 5mm LED’s around. I figure I can rebuild some of the many 9 LED lights I have laying around if nothing else.
I ended up purchasing 3 different sets of them from 3 sellers on ebay. 2 of them shipped together as it was simply the same seller with different user names. They were all for the exact same LED’s, cool white standard 5mm LED’s. Nothing unique about them that I could see from any other 5mm cool white LED.
i spraypaint the boards with flat white before building.
bounces back some of the light that shoots out the back.
L4M4 wrote:
I built myself some little Modules for photography – they are extremely good.
I would say, the CRI is easily over 90 and they are perfect for lighting stuff for photos or in glass cabinets
My anti-static bag has a similar looking label, but says “LED LAMPS” at the top and has the information that is in the Description section of that Ebay ad. So as snakebite says, if the description is accurate, those are the LED’s you want. If the picture is accurate, those are not the LED’s in the OP.
Just checked the ali site on PC that I mentioned earlier, the seller was Power Magic but they no longer have any items for sale.
Both links in the original post go to pages for items no longer offered for sale on eBay
search for JNL5254CHLGW5007-CA4
other sellers have them.
I can confirm after ordering then that these are NOT high CRI LED’s. Just you basic 5mm cool white LED’s. Nothing notable at all about them, looks just like the ones in the picture.
I guess the search is still on for a real supplier of them.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
they are back?
Great, ordered a set, now to see how long shipping takes. lol
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
The LEDs from OP are back as well
http://www.ebay.de/itm/131627472295
Well I ordered one of those as well, guess it is a race to see which comes in first. Figure I can use them to build an LED cube if nothing else.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
seems all the sellers went away then came back at once.since they all use the same pics and sell the same photo lights the leds are the same.
if so now is the time to load up once these 2 orders arrive and are what i got when i posted these.
my orders came very fast.
did you get your order?
Not yet, unfortunately. Shipping is unusually slow these days, I have yet to receive anything ordered since late June.
they do shoot a bit of light out the back.
i spraypaint my boards white before installing the leds.
a radioshack round prototype board loaded with 36 of these parallel with a .47 resistor in series works great in a versapak flashlight.
and can double as a video light.i shot some video of the first startup of a friends chevelle we rebuilt with that light.minimal glare off chrome valve covers,ect.
Put one of these LED’s in one of these lights. First tried a Red LED, but just couldn’t see what was needed. With this LED, got about 1/2 lumen of perfect light that didn’t wake me up or run my night vision. Thinking about putting in a “Police” light to get a little more concentration of light from the reflector. On a side note, if you haven’t played with those motion detectors, you should. They are so easy to use and have a lot of potential uses since they can take up to 24v.
I just got my order in, they have the correct part number and look like the ones in the pictures earlier in the thread but mine at least are not warm tints. They are not ice cold but I would say 1A/1D ish tint. The CRI also appears to be average, compared to my BLF348 there is no comparison in the color rendition but that could also be partly the tint.
Maybe they ran out of the ones you got or sent you the wrong thing?
These are still pretty nice LED’s for what they are, just not what I was hoping.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Sub’d for later…
View BLF with NO Commercials Here!
Which seller did you purchase these from?
I ended up purchasing 3 different sets of them from 3 sellers on ebay. 2 of them shipped together as it was simply the same seller with different user names. They were all for the exact same LED’s, cool white standard 5mm LED’s. Nothing unique about them that I could see from any other 5mm cool white LED.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Aw that’s too bad. I just bought a light that I really like that takes 5mm emitters. I’m on the look out for something with a nicer tint and output.
You can try to find nichia 5mm leds, my thread related to this led is
http://budgetlightforum.com/node/15229
link
Istanbul’s new bridge at night
That was the first place I looked, but ledrise wants 25euro for shipping to Canada… That’s almost $40.00 CAD
I was lucky than, That time they were sending with registered mail from Romania, which is very near to Istanbul, Turkiye.
Istanbul’s new bridge at night
I’m interested. please let me know if these are the HICRI ones.
Here are all my reviews on BLF
i spraypaint the boards with flat white before building.
bounces back some of the light that shoots out the back.
Pages