I think this is the main Anduril2 thread
But BLF has a tendency to derail threads (which is good).
I think this is the main Anduril2 thread
But BLF has a tendency to derail threads (which is good).
Thank you for the suggestion. I poured some acetone in the tailcap, but the pcb is not moving at all. Do you have some tips?
I searched a little and found the following link:
https://www.reddit.com/r/Hanklights/comments/w0huq3/d4v2_tailcap_magnet_removed/
It looks like the glue needs some time soaking and some heat. I put the tail cap into a container and poured some acetone for a proper soak. I will check back tomorrow and see if I would be able to remove the magnet.
Thank you!
The 0136 (d4sv2-tintramp-fet) builds don’t work yet, there’s emisar-2ch which works on my dual channel D4S and is essentially 0135, but there’s no direct equivalent to 0136 yet, you can use the emisar-2ch build but it won’t use the FET. Here are images for every currently-working build target:
Wow thanks! Will try those.
This build is fantastic on the D2. I’d imagine it would be great on most 2 channel lights too.
@Hank_Wang you should offer MT-G2 if you still have them.
I’m in love with D1K creamy room sweeper
L-R
D1K MTG2, D1V2 FC-40
Oh btw, everyone interested in yellow crap around hotspot gone on XHP70.3, cover white silicone around dies.
Before
After
Nice! Wonder if there is any thermal impact since black absorbs heat?
+1 for MT-G2, it’s an awesome emitter, I’d love to have it in D1k or DM11.
I know you used to sell it, would you consider bringing it back Hank?
Just coming back from a little night walk with the D1K (XHP 70.3 HI 4000K 70 CRI from the not-so-secret-anymore secret menu).
I really want to heap praise on the efficiency of the XHP 70.3 + boost driver combo:
The light was able to sustain level 7 (120/150) indefinitely @ 10°C air temperature, body was approx. 35-40°C. I’m impressed.
I guess I better bring lots of spare batteries for those longer walks.
+5 on MTG2
As far as I know, the MT-G2 LED is out of stock and discontinued.
Looking around on Digikey, Mouser, and others, the MTGBEZ-06 is still available in a variety of color temps
Mouser has only a single MT-G2 6V model listing in stock and a single MT-G2 9V listing model in in stock, the rest of 180 listings are labeled as Non-Stocked, just because they show up on a search does not mean they are stocked.
You’re right, I wasn’t paying attention to the voltage, rn they have a single reel of 2700K, Digikey doesn’t have any @ 6V. There’s just a few other sites with small quantities available
This D1 sale is awesome
Are the XHP 50.3 HI that Hank is offering in the DM11 3V or do they use the boost driver (6V)?
Pretty sure 6V, the only cct available in 3v is 6500k low cri. Maybe the 6500k option is 3v.