It sounds like you are not clicking quick enough and it is taking your clicks as long presses instead of short presses.
Thank you MRsDNF - another issue was I hadn’t disabled the medium press and that was creating havoc with what I was trying to do!!!
Anyway, now all sorted - starts each time on moonlight then four levels of brightness. Great.
Thanks again
SP
Terrific pictures, LSX. My aluminum set arrived yesterday, they were in the same boxes shown in your photos and had enough wrapping you could play volleyball with the package - seems like they got the message. I ordered these Feb 28, they showed shipped on March 2 and were delivered in the NYC area on March 21. The lights themselves are fantastic, from the heft to the finish quality and especially the Bistro interface! Haven’t too much time to test them out, but can already see the X5 is amazing. Thanks to everyone that contributed to the design and GB…
Yes, don’t do a full click. Just press it halfway to change to the next mode. It takes only a small fraction of a second and makes no sound. The full click is only needed to turn it on or off.
4.17v and 4.18v 02/10/2016 - 23:08
4.16v and 4.17v 02/11/2016 - 20:24
4.11v and 4.17v 02/13/2016 - 19:47
4.088v and 4.16v 02/14/2016 - 18:5
4.043v and 4.16v 02/16/2016 - 22:06
3.977v and 4.16v 02/20/2016 - 11:40
3.938v and 4.15v 02/22/2016 - 20:16
3.908v and 4.15v 02/24/2016 - 21:26
3.859v and 4.15v 02/27/2016 - 22:49
3.820v and 4.15v 02/29/2016 - 22:35
3.789v and 4.15v 03/03/2016 - 22:25
3.774v and 4.14v 03/06/2016 - 22:30
3.753v and 4.14v 03/11/2016 - 22:55
3.670v and 4.14v 03/19/2016 - 15:47
3.633v and 4.13v 03/22/2016 - 22:39
Is here anyone who is invited into manufactoring process?
Does head`s internal thread end synchronised with holes position?
I`m thinking about X5 quad pill/spacer and interested if it is real to make such pill, screw it into the host, mark holes location from driver`s side and mill grooves for wires to except host drilling. If each host has difference in thread end and wire holes relative positioning, spacer without thread is better way.
Sorry for the offtopic, please answer here: Low-cost copper pills, spacers, optics, drop-ins (Updated 23/10/2022))
The X5 looks great with patina. This is after 1 month of no polish.
This looks very nice to me. Did you store it in particular conditions? Mine is already several weeks old and there is no patina. But I keep it mostly in its box.
Jescereal, that is just beautiful….
When I first received it, I polished it and removed the coating that prevents patina. I carry it literally everyday and handle it every chance I get.
That is REALLY NICE…… like a brand new month old penny…… Im jealous!
In old times they used horsepee on those copper roofs (on churches for example) to have them turn green faster.
Who is going to show us the first green X5 and testing the water resistance of it while getting there 
Hello. I like mine shiny. You say there is a coating on these that will keep the shine? So far mine has kept its luster. If it starts to fade I going to wash it in ketchup
Yes, there is a coating. But we don't know what the coating is, & how long it will last. 
I’d hate to be the roofer’s apprentice who was given a bucket and told to follow the horse around. 
:–5
the warehouse find one left in the corner
Probably one of mine that was never sent. :-((
I still don’t know if mine wasn’t sent or they lost it, a real shame, either way.
So how they get the horses up there? 
if you dig in this thread we ave already covered every patina option possible, but still would like to see photos of them all.
Well now that is a good question, I am talking about old times, not ancient when Pegasus could just fly up there.
Hmmm I missed the pee idea to get a faster oxidation, must have missed it in all those 6K+ posts 