This is the proto-type of Rey`s first BLF Ti light.
- Discussion thread
- Order thread $50 without or $60 including extension
My first impression in hand was very positive.
Although I had seen all the pictures in WWEFANS threads, in person it looks better!
Originally I wasn`t very impressed with the corn style knurling in the pictures, but having it in hand, I must say I really like it.
Anyway.. here are the pictures
ENJOY!
18350 style
with the heavy and thick pill on the side. (He should have special orders for these, because they are very heavy and good for triples, also in the Convoy S2+
and with extension.
and compared to the Convoy S2
The pill is at least 3 or 4 mm thick.. Should dissipate heat rather quicly
The left is the Rey one, and the right is the Convoy
I screwed the pill/reflector etc from the Convoy right into the Rey BLF Ti light.
The bezel ring has still some machine marks as can be seen in the next picture
The trit slots are very close to the edge, but still doable!
the clicky side.. the copper ring (around the switch) should be screwed down further, and I don`t really understand the way this switch should work, but there are some parts missing. It should be the same as the trustfire f20????? please correct me if Im wrong Rey
One thing I noticed is that the knurling on the extension is of difference size.. although minimal.
The tail end has square(ish) knurling, while the extension has rectangular.
Keep in mind this is the proto type, and not the final product. Also the knurling is done a little different on the tail end than on the extension.
The extension and the tail-part aren`t perfectly matched in length (alignment, see picture below), a little off center, when screwed down.
threads:
nothing to complain. The ring is thick, and will fit snug.
and a few more pics to drool
next to its cousin Sinners 18350
