Code now public! BLF A6 FET+7135 Light. Short 18350 tubes and Unanodized Lights Available

[B42]

@saypat

@bugsy36

Next week. 1A and 5A first. 3D the following week

I know what 1A and 3D look like …. what does 5A look like? What is the number on that K scale?

1A = 6000K?
3D = 4500K?
5A = ?

thanks.

4,250-4,000K depending on which 5A

[tkd15]

Please add one 3D to the list for me,
thanks to everyone for this great project.

[M4D_M4X]

@jack-bkk
4 pcs with tracking is 20.30 at banggood

but i never needed tracking to get a refund…

if you had good experience what fasttech delivered order there.
i had more bad than good ones (and cs is a pita there)

[keengeorge]

@bugsy36

Also in the OP:

Finally!! :) It has been a long road to get here. I never knew there was that much involved in putting together a custom light :) This light is like no other budget light in existence and made specifically for us at BLF with components and firmware developed by BLF members. Throughout the process we listened and asked for improvements AND we got them. A couple examples are 1) The deep carry clip and 2) Instead of just DTP copper for the emitter this is genuine Noctigon. We even convinced teh manufacturer to give us 3 tints. Of course 1A for the coolest max lumens possible, but also 3D instead of the usual green 3C and even 5A.

I thank everyone for their patience and support and a special thanks to our very own sorceress ToyKeeper (but in reality an angel in disguise!), Dr. FrankenDale aka Dale or DB Custom, Kronos aka Kronological, RemanG, JohnnyMac, and even Neal at Banggood (the list is too long to keep typing LOL)

Final Specs:

• XPL emitter in 1A, 3D, and 5A tints
• Up to 1600 lumens depending on battery used and spring bypass
• Noctigon Copper mcpcb
• A17DD-SO8 driver +1 7135 driver(FET for direct drive of upper upper and 7135 for regulation of lower modes)
• TK UI made by our own ToyKeeper (see some features) (Click HERE for more operation detail)
• • User selectable 4 or 7 evenly modes (Moon to High)
  • Reversing feature
  • Moon capable
  • Hidden blinking modes (inlcuding strobe and bike mode)
  • Hidden battery check
  • Low voltage protection
  • User selectable mode memory (always starts on Moon without mode memory but easily reverses to Turbo with a click)
  • Fast PWM for lower regulated modes
• AR Glass
• OP reflector
• Deep Carry pocket clip
• BLF-SE engraving
• HAIII Anodizing
• Packaged in a gift box
• Total Cost $25.00

A word of warning. This light is and only will be available at Banggood. No other reseller will have access to this light. Any claims or advertisements that another retailer has these can be assumed to false and the product to be counterfeit. This light will be available to those on the list and while there is demand. Once demand wanes this light will no longer be available except for Banggood's remaining inventory.

Good Day Bugsy36,

What bin(s) are the XPL emitters for the 1A, 3D, and 5A tints?

Thank you Very Much,

George

[keengeorge]

Good Day to the Entire BLF A6 team,

I would like to Thank Very Much the people that made this GB a successful reality: Bugsy36, ToyKeeper, Dale aka DB Custom, Kronological, RemanG, JohnnyMac, Neal at Banggood, & Manker

You ROCK!!

Best Regards,

George

[M4D_M4X]

Neal heared what you are asking for....

Samsung INR18650 - 30Q 3000mAh (if you like a afflink klick here)

Code: M4D4BLF price: $ 5.84

[keengeorge]

@M4D M4X

Neal heared what you are asking for....

Samsung INR18650 - 30Q 3000mAh (if you like a afflink klick here)

Code: M4D4BLF price: $ 5.84

Good Day Martin,

Could you Please ask Neal to extend the code till say the end of this month?

As 08->15Aug15 is a Very Short time period, & we will all be financially broke after buying all the BLF A6 lights.

Thank you Very Much,

George

[M4D_M4X]

asked….

[Intracloud]

Of course NOT

Please add me for one of each tint. 3 total.

Would also take the opportunity to thank everybody who made this dreamlight come true. Splendid work. How many of you cut there sleeping hour in half?

[TheBo]

is it possible to add more, or is it closed?
I’m tempted to try the 5a flavour :p:

[jack-bkk]

@b-42

i jsut received them yesterday i tried them in every flashlight i have even in nitecore reverse protection they work even they are flathead btu not really that flat.

i dont hvae a light yet like this BLF A6 where this battery might make a difference but i orderd a few and 2 exact the same specs so i will try use this pair of identical lights to test different batteries.

[chuckhov]

Add all you want!

-Chuck

[ale9g]

Hi, would you count me for one in NW?! Thank you

[PerttuJ]

I think I need both NW tints.
So could you add another NW for me please.

[gloomywarfreak]

I want one in neutral white. Thanks!

[FmC]

Hi, I'd also like the 3D tint.

# 212 FmC 3D

Cheers :beer:

[finges]

@M4D M4X

Neal heared what you are asking for….

Samsung INR18650 - 30Q 3000mAh  (if you like a afflink klick here)

Code: M4D4BLF price: $ 5.84

Thanks, this should be the best cell (and best offer!) for the A6.

[MountainKing]

What do I need to do now? Pay somewhere? Wait? Thanks!

[jack-bkk]

@ M4D

yes you right but its HE2 not HE4

right ??

i think without tracking number it is not registered post so i guess its impossible to proof for the seller that you did receive it as there will be no signature.

[Gj1 (Gj)]

@156NW & 157NW, I’ll take both in 3D.
Please add 2 more 3D. Thanks.