DQG 18650 EDC--World's Smallest 18650 Flashlight

[Haterade]

Well, I typically have at least 1 keychain light + 1 pocket/neck light on me. Sometimes a 3rd in a bag or jacket.

But I (like many here) have a rotation of several “EDC” type lights [knives too]. I say EDC-type meaning anything you can conveniently carry & use on a daily basis.

This is open to interpretation depending what your daily duties consist of… I am sure active military operators & law enforcement officers would have different definition of EDC than your common office worker type.

[lionheart_2281]

@Haterade

Well, I typically have at least 1 keychain light + 1 pocket/neck light on me. Sometimes a 3rd in a bag or jacket.

But I (like many here) have a rotation of several “EDC” type lights [knives too]. I say EDC-type meaning anything you can conveniently carry & use on a daily basis.

This is open to interpretation depending what your daily duties consist of… I am sure active military operators & law enforcement officers would have different definition of EDC than your common office worker type.

Exactly, I’m a firey, so I always have a torch clipped onto my turnout gear, as well as a torch in my normal wear pants.

As well as a torch on my helmet too. The crummy incans we carry on the trucks are…well…crummy.

[Haterade]

Thanks for your service sir.

Can’t believe they have you guys using halfassed incans… well actually I can… the bastards in the ivory towers can’t handle a budget to save their lives haha

[lionheart_2281]

@Haterade

Thanks for your service sir.

Can’t believe they have you guys using halfassed incans… well actually I can… the bastards in the ivory towers can’t handle a budget to save their lives haha

The torches on the trucks (if you or anyone has heard of em) are Streamlight SL-20’s, but REALLY old ones.
When I recieved my SC52, one of my non-flashaholic laughed at it. I told him to grab a SL20 and we compared. It was a bloodbath - the SC52 is 25% of the length / body diametre of the SL20, but has at least 5 times the brightness.

Really happy with the SC52, can’t wait for the 900lm SC600 to be released…

[djozz]

@Ric-CN

@djozz

@neverfeltbetter

@djozz

d*mn, just tried to remove the led/driver board of my DQGIIIAAA to make a picture of the led sitting on the driver board (I removed it before, so no calamities expected) and while removing the foam insert a current regulator was ripped off the board with it (*##@!!!). Stopped there but now it won't switch to high anymore. Too tiny to solder back I'm afraid....

Result: no nice picture to show you, and no working flashlight *sigh*.

This is an expensive hobby in the end...

show us a picture :~ I just took a look a mine and with a very fine tip you should be able to solder the missing stuff back to the board.

You encouraged me to try it, but at this moment I can't get the board out of the head anymore . anyway, here's how the disaster looks:

On the left side of the board is where the part is ripped off, the part still sticking to the foam is seen bottom right next to the flashlight head. Now that I see the picture, it appears like the complete solder pads were ripped off with the part. It's beyond repair after all

Getting a bit off topic now, let's talk about happy stuff again, the 18500 DQG....

Looks like DQG AAA, Need a new driver for DQG AAA to fix it? i can send one to you for free. I have 3 pieces DQG AAA driver left.Please PM me or send an email to sales@cnqualitygoods.com BTW, DQG IV AAA SS version will come out next month, the UI will be Screw-off and loose-on. Maybe i should post this on DQG AAA thread. Ric

Happy, yesterday I received the new driver for my DQG AAA that was kindly gifted to me by Ric, with an spare foam insert going with it. It was without a led, so I had to reflow one on it. Tiny, tiny, tiny!!! And other components on the same board on both sides . Decided to clamp the driver in, put solderpaste on the board and some on the new led that was going in and heated the board from the underside onto the battery plus contact board. My 15W solder iron did not nearly give off enough heat to get through the (non-metal) driver board, so I changed to the gas-heated iron . It took a while, the whole board got steaming hot but the led flowed in place eventually, without the other components floating away:

(hey, that is not a Cree led )

And to my surprise (after all this heat) the led fired up . Assembled the light, earlier I had ruined the TIR a bit so the light has become a bit floodier now, but that is actually fairly nice for this small nearby light. I am a happy owner of a working DQGIIIAAA again, and now in 92+ CRI . Thanks Ric!

[Haterade]

@lionheart_2281

The torches on the trucks (if you or anyone has heard of em) are Streamlight SL-20’s, but REALLY old ones.
When I recieved my SC52, one of my non-flashaholic laughed at it. I told him to grab a SL20 and we compared. It was a bloodbath - the SC52 is 25% of the length / body diametre of the SL20, but has at least 5 times the brightness.

Really happy with the SC52, can’t wait for the 900lm SC600 to be released…

Yup. Gotta love that. I have surprised many of my buddies with my lights. The tiny form factor of this 18650 would be fun to mess with those not in the know.

[prisma]

Any news here?

[iron_potato]

Pre-order link
Delivery time: 5th April ;
Preorder price —–30usd; Retail price—35usd

LED: CREE XM-L2 T6 LED / CREE XML T6 3C NW
Material: 6061-T6 Aluminum
Reflector: optics lens for T6
Mode: Low>>Mid>Hi;Head twist ON/OFF
Digital Current Regulation; Max 2A 500 Lumens
Battery Type:1*18650 (Protection or Unprotected battery) (not include)
Size: 91mm(Length)*25.5mm(head diameter)*24.5mm(tube diameter)
Weight::38g(not include battery)
Accessories: 1*stainless steel clip

[djozz]

ordered (NW black)

[Orion]

Does this mean that the Cool White (CW) version is an XM-L2?

[djozz]

@djozz

ordered (NW black)

just now noticed that the NW version is XML and not XML2. Well, hope the pill is servicable then...

[funkstrong]

Dang, I see this and the thrunite saber groupbuy at the same time. My wallet is taking a beating.

[flashlight_man]

Nice price for such a tiny rocket. Thanks Ric!

[Haterade]

Any chance for a xml2 NW?

[Werner]

I am confused too…as there stands xml2 t6…?
And I can’t see the product pictures.

[Chicken_Drumstick]

@NightCrawl

So it always starts on high? Thats sad to hear… low would be better.

Not for everyone. Having a functional memory would solve this though, as you can effectively choose the mode order and what it starts on.

[mizjif]

I will be ordering today as well, however not until I can see the pictures. None of them work. I’d like to see photos of the black vs. titanium color.

[Xiotis]

Is this right? CW comes with XM-L2 whereas the NW with XM-L?

I did not notice and i ordered NW. But i prefer the efficiency of XM-L2.

Can the company clarify?

[Chicken_Drumstick]

I would really like to order this. But if it has no memory then a light that always turn on in the mode I least want to use, is almost completely useless, or at the very least a huge annoyance.

Why is mode memory not offered on lights like this?

On a side note, as it’s a TIR optic, wouldn’t it make logical sense to offer a floody TIR with an XM-L2 and a throwy TIR with with an XP-G2? Compact pocket throwers are very cool and often very handy.

[djozz]

@Xiotis

Is this right? CW comes with XM-L2 whereas the NW with XM-L? I did not notice and i ordered NW. But i prefer the efficiency of XM-L2. Can the company clarify?

Don't know what it is with neutral leds. I had the same with the Eagletac D25AclickyTi2013 in januari, cool white was XP-G2 R5, neutral XP-G R4 . It is not that the new generation neutrals were not available, I was using them already. Something with the availabilty of larger quantities of a specific tint???