hi do you like 2AA battery light? Jaxman M2 is ready

Commercial Sellers' Spot
51

I`m looking forward to reading somebody`s review. It might be replacing my Klarus P2A that my wife has as her bedside light… The P2A has no an unreliable Low, as it sometimes flickers etc. This Jaxman could be a nice and affordable replacement in the future.

I don`t like side switches in general on smaller lights, so this would fit the bill.

52

Nice host for XHP50.2 :laughing:

53

I have find that there have many BLFers let me sell host of M8, they need a xhp50 version M8…. :person_facepalming:

54

Same here - ordered 5500k.
Coming to the UK.

55

M8 host with battery extension tube would be great! Either for xhp or mt-g2. I have the first gen mini c8 and love it.

56

Mine arrived today, some pictures in this post, I think it’s a great little flashlight.

57

Hey khas, is there a chance you could measure the reflector in the M2, going to look for a smooth reflector while I wait on mine to be delivered, thanks!

58

Sure thing here you go :

I am glad you asked gave me a perfect reason to change the emitter :

59

Hey khas, you leave out vital information :expressionless: :wink:
I can see an XHP50.2, I guess 2x14500 li-ion, but what driver did you use?

60

The driver is a LD-2, this little fellow handles the heat very well, does get hot though :sunglasses:

61

Nice mod Khas! On the LD-2 driver what do you have the current set at?

Thank you very much for the reflector info, much appreciated! I have a PM in to Mr. Jaxman, about possibly making some smooth reflectors, but in the mean time I’ll begin my search!!!

62

It’s set @ 6Amps, the batteries are Windyfire IMR 600 mAh, so runtime on high mode isn’t that great :smiley:

63

Is this the driver you are referring to khas? Thanks in advance. :slight_smile:

http://www.mtnelectronics.com/index.php?route=product/product&path=67&product_id=473

64

Is there sutable diffuser for this JAX?
What about this one?
https://www.fasttech.com/products/0/10003970/1498901-authentic-nitecore-ndf34-34mm-beam-diffuser-for
https://www.fasttech.com/products/1606/10001948/1140009-beam-light-diffuser-for-led-flashlights

65

No it’s this one from led4power, but there is a new version the LD-3 .

66

OK, thank you for the info khas. :slight_smile:

67

Hey khas, just 2 more dimensions please, what is the battery tube inner diameter and the outer diameter at the thinnest point, probably the tail cap area would be the thinnest??? Thanks for the help!!! :+1:

68

I would suggest to make it a 1AA / 2AA alcaline / 1x14500 Li-ion battery using extension tubes then put a XPL-Hi and a smooth reflector, add some more modes like 1% 15% 40% 70% and 100% brightness with mode memory.

69

1x14500 XP-L Hi smooth reflector sounds an awful lot like the BLF-X5…

70

Battery tube inner diameter : 15 mm, outer diameter at the thinnest point : 17 mm in the groove for the o-ring in the tail.

I didn’t plan to keep the XHP50.2 in the Jaxman M2, but I kinda like the combination, so much so that I have just ordered a LD-3 driver for it :person_facepalming: