KD (kaidomain): Deals and new products thread

BanL · May 6, 2022, 2:18am

Hi

This host is using 16mm driver.

We have this 15mm 0.9V - 3.6V 3-Mode Boost Driver Board

in 16mm once.

I will post it and see if you are interested or not.

Thank you

everydaysurvivalgear · May 11, 2022, 2:32pm

Any chance of getting a higher amperage boost driver for the new generation of XHP70.3 LED’s they are rated to 7.2amps?

Sidney_Stratton · May 15, 2022, 9:22pm

Hi Ban:

Regarding your “15MM 0.9V - 3.6V 3-MODE BOOST DRIVER BOARD” (link), so unfortunate to have ‘strobe’.

Anything else in this 15 to 16mm size (2 or 3 modes) for Lithium-Ion?

Skylight · May 17, 2022, 10:48am

Hi BanL,

would you be able to source 10mm copper DTP MCPCBs for 5050 leds like this one?

Thank you.

LunaLoves · June 17, 2022, 5:48pm

Hey BanL,

is there a big reason for removing a lot of things like the LED triples and quads from your AliExpress store?

Rusty_Joe · June 17, 2022, 6:33pm

Ahem…

Forward clickies with separate switch for mode memory?

Sidney_Stratton · June 17, 2022, 6:45pm

That 15mm driver has strobe in mode sequence. Dealbreaker.

Rusty, would you be referring to a side switched (eSwitch) driver with a forward clicky? I’m all ears if you find such in 16mm.

Rusty_Joe · June 17, 2022, 6:57pm

No, rear pressure switch (momentary) with side switch for modes. Mainly, I want a tactical KDlitker light line-up with dual / momentary configuration. Was hoping for a response from Ban on when that might come to fruition.

everydaysurvivalgear · June 17, 2022, 9:07pm

I messaged Ban a few days back, maybe a week ago but he has not been online in 3 weeks, maybe they are in lock down?

LunaLoves · June 17, 2022, 9:39pm

They have been adding new emitters / products to their page though

Sidney_Stratton · June 17, 2022, 10:18pm

Must be a hell storm with sporadic lockdowns and suppliers without personnel or material. The logistics dealing with daily testing and/or restrictions.

I would have thought the masses would have mobilized and demand easing up. But a totalitarian system doesn’t permit any outcry.

I’m grateful KD still is running. Ban has his hands tied. I suppose later will show up.

BanL · June 18, 2022, 4:25am

Hi

Can you see other products like
https://www.aliexpress.com/item/4001203420435.html

Our cert is still valid. It should be valid on those EU country.

Thank you

LunaLoves · June 18, 2022, 7:05am

I can see that product, but if I open the product page for the 219BT triple for example it says:
“this article can’t be shipped to Germany”

PatX · June 19, 2022, 2:20pm

Hi BanL,

you offer SFQ60 7070 LED but the SFQ60 is normaly 5050 only. Is this right or is this a SFN60 LED?

Are there more Nichia 519A with other light colors incoming? Are they also available in triple led on pcb?

Thanks

Sk9 · June 28, 2022, 5:24pm

Hello BanL,

Will the xhp50.3 HI 4000k 80 CRI be available again?

Chatika_vas_Paus · August 9, 2022, 6:35pm

Has anyone bought xhp50.3 hi 3000k and can make some measurements what it looks like?

flightless22 · August 21, 2022, 7:34pm

Hi BanL. What size mcpcb fits inside KDliter C21? Is it 20mm?

BlueSwordM · September 5, 2022, 4:40am

@banL Hello.

I would like to buy this light:
http://kaidomain.com/Led-Flashlights/Kdlitker-flashlights/KDLITKER-C21-Cree-XHP70_3-HI-3600-Lumens-21700-LED-Flashlight

Would it be possible to request the 5700k 90CRI XHP70.3 HI LED to be used in this light?
It would be nice to know, thank you.

smurcod · September 6, 2022, 2:48am

Bump.

FYI I noticed their current XHP70.3 HI listings (for bare LEDs) has a 5700k 90CRI with M2 flux rating and the 5000k 90 CRI they’re selling is rated higher at M4.

NeutralFan · November 2, 2022, 2:46am

In case people are interested, KD has a new lime green S2+ host and brought back the blue one too.

I’m really impressed with the lime green host! Really good matte anodizing with plenty of grip.