skinny_tie
(skinny_tie)
January 8, 2020, 11:22am
9
Thanks for organising this nzoomed!
I’m definitely interested in one driver, possibly more depending on cost. I’d be interested in a FET tailswitch too.
I haven’t actually got a plan for the driver. I’d love to hear what other people are planning to do with them.
id30209
(id30209)
January 8, 2020, 11:25am
10
I have coming in mail several XHP35HI in 90CRI version and FT40 (XHP70.2 dedommed 12V HI CRI version)
:)
1stein
(1stein)
January 11, 2020, 11:24am
11
In for 2x 17mm + 2x 20mm
or
3x 17mm (if 20mm not available)
Plans? Plenty.
Edit: at price ~30$ I’ll take just half of it
aswang
(aswang)
January 8, 2020, 12:52pm
12
In for 2 x 17mm and interested in 2 x 20mm.
rngwn
(rngwn)
January 11, 2020, 11:16am
13
In for 2x 20mm depending on price.
Edit: Consider this as a “soft” interest. I’m still weighting options.
I’m interested in 2, more if they are inexpensive. I would like 20mm version as well.
FT40? Do you mean GT-FC40
rngwn
(rngwn)
January 8, 2020, 1:12pm
15
I think he mean the FC-40, yes.
Skylight
(Skylight)
January 8, 2020, 2:54pm
17
I would need one 20mm boost driver for the MantaRay C8.2 with a XHP70.2.
One 17mm boost driver would go in a Convoy S2+ with a XHP50.2 and maybe one in a Convoy C8+ with a XHP35.
contactcr
(contactcr)
January 8, 2020, 3:46pm
18
I would be in for one. If it could be modified for 9V so I could use it on a triple in series I would be in for a second one.
id30209
(id30209)
January 8, 2020, 4:10pm
19
Hm, 9V...damn that sounds interesting...
tekwyzrd
(tekwyzrd)
January 8, 2020, 4:27pm
20
interested in 2 each of the 17mm and 20mm but that depends on the final price
mattlward
(mattlward)
January 8, 2020, 7:12pm
21
I would be interested in at least 2 of each, if 22mm came along I would not be unhappy. If you decide to do the fet tail boards, 4 or 5 of them as well.
pc_light
(pc_light)
January 8, 2020, 7:34pm
22
Always admired Loneoceans’s designs, would like to try one please.
nzoomed
(nzoomed)
January 8, 2020, 10:46pm
23
skinny_tie:
Thanks for organising this nzoomed!
I’m definitely interested in one driver, possibly more depending on cost. I’d be interested in a FET tailswitch too.
I haven’t actually got a plan for the driver. I’d love to hear what other people are planning to do with them.
Been thinking about the tailswitch and will likely get a bunch of the boards made, and perhaps a small lot of the pogo programmer boards too, but I will leave it up to everyone to build them. They are not too difficult to assemble and is a good way for those to get used to SMD work
nzoomed
(nzoomed)
January 8, 2020, 10:50pm
24
Well if its possible to run in 12V, im assuming this would be possible to modify for 9V also. Loneoceans may be able to provide more details on this.
Scallywag
(Scallywag)
January 8, 2020, 10:50pm
25
Interested in two (of each, if you do 20mm).
nzoomed
(nzoomed)
January 8, 2020, 10:54pm
26
Since there is alot of interest in the 20mm version, I may as well ask the manufacturer how much more it would cost if they can do half the batch in 20mm, since its the same components, it wont be too difficult for them to do both runs together, but will still be seperate cost for another pcb design, stencils, etc so not too sure what saving there would be at this stage.
e1000
(e1000)
January 8, 2020, 11:01pm
27
Count me in for 4 of the 17mm’s.
Interested in 2 of each… thanks for doing this!